Custom Bats Cricket Forum

Equipment => Other Gear => Topic started by: mattcoll12491 on July 12, 2012, 03:15:19 PM

Title: How do I fix this?
Post by: mattcoll12491 on July 12, 2012, 03:15:19 PM

(http://i183.photobucket.com/albums/x153/mattcoll12491/545c9ce7.jpg)

Walking home from nets last night (up a hill) the retractable handle of my Ayrtek bag came out of its 'slot'

Any ideas to fix?

Title: Re: How do I fix this?
Post by: Whispering Death on July 12, 2012, 03:16:27 PM

ask Mr Ayrtek - he'd be your best bet by far!

Title: Re: How do I fix this?
Post by: roco on July 12, 2012, 03:28:46 PM

That's happened to my bag

Title: Re: How do I fix this?
Post by: Ayrtek Cricket on July 12, 2012, 06:39:32 PM

We changed the handles as a result of this feedback, I'm awaiting a reply from our supplier for suggestions on how to fix this...

Title: Re: How do I fix this?
Post by: RossViper on July 13, 2012, 06:22:41 AM

i think your best best would be a bit of sprung metal shaped to a V.... 

Title: Re: How do I fix this?
Post by: Blazer on July 13, 2012, 08:37:09 AM

You must be able to remove rivets on the plastic bit and slide it back in the metal back in. you might need to source new rivets to fix it back again.The grooves on that plastic bit is what prevents the shaft for sliding out.
Bit of DIY to do on rain hampered days.
http://www.ehow.com/how_7600635_undo-rivets.html (http://www.ehow.com/how_7600635_undo-rivets.html)
https://sew4home.com/comment/1734 (https://sew4home.com/comment/1734)

Title: Re: How do I fix this?
Post by: charlie15 on July 13, 2012, 11:43:58 AM

Quote from: Blazer on July 13, 2012, 08:37:09 AM

prevents the shaft for sliding out.
[url]http://www.ehow.com/how_7600635_undo-rivets.html[/url] ([url]http://www.ehow.com/how_7600635_undo-rivets.html[/url])
[url]https://sew4home.com/comment/1734[/url] ([url]https://sew4home.com/comment/1734[/url])

Snigger

Title: Re: How do I fix this?
Post by: RossViper on July 13, 2012, 06:19:58 PM

Quote from: Blazer on July 13, 2012, 08:37:09 AM

You must be able to remove rivets on the plastic bit and slide it back in the metal back in. you might need to source new rivets to fix it back again.The grooves on that plastic bit is what prevents the shaft for sliding out.
Bit of DIY to do on rain hampered days.
[url]http://www.ehow.com/how_7600635_undo-rivets.html[/url] ([url]http://www.ehow.com/how_7600635_undo-rivets.html[/url])
[url]https://sew4home.com/comment/1734[/url] ([url]https://sew4home.com/comment/1734[/url])

if its come out, putting back in should not be the problem, looks like the plastic bit is one piece so uninviting its not going to help at all