Custom Bats Cricket Forum

Equipment => Bats => Bat Care => Topic started by: Howzat on October 11, 2009, 04:20:53 PM

Title: Redback refurb for the 3rd time...
Post by: Howzat on October 11, 2009, 04:20:53 PM
Need to fix my Redback again as the toe is pretty badly cracked (must be all the runs I scored this year ;))
I remember hearing how you can wrap string soaked in glue or something around the bat and when it dries it contracts pulling the bat together? If anyone has anymore info about this that would be great!

PS. This bat is just awesome hence why I keep repairing it even though its on its last legs! And for the record I scored 291 runs this year @ 16.32
Title: Re: Redback refurb for the 3rd time...
Post by: Talisman on October 11, 2009, 04:47:38 PM
Forget that, never heard of it, for the worst cases you can glue, pin and then wrap in cloth tape and seal with resin.
Title: Re: Redback refurb for the 3rd time...
Post by: Howzat on October 11, 2009, 04:58:30 PM
Hmm Ok strange, Im sure it was Norb who said this.  Anyway ill post some pictures later.
Do you think you could reply to my PM?
Title: Re: Redback refurb for the 3rd time...
Post by: Tom on October 11, 2009, 05:01:07 PM
Mike, didn't Ian Blackwell's Bradbury (the one with shoulder damage) that you once had have binding round the shoulder where a crack is?
Title: Re: Redback refurb for the 3rd time...
Post by: Talisman on October 11, 2009, 05:10:35 PM
Yes, and that was not tightened to my knowledge, just glued.

It is mainly used by Dan at Chase in my experience in my locality.
Title: Re: Redback refurb for the 3rd time...
Post by: Tom on October 11, 2009, 05:15:10 PM
I think Leo means when it dries it automatically contracts. If you bind it tightly round when wet and glued the string will stretch, as it dries out it will tighten up.

A cotton based string would stretch a good amount when wet I'd imagine, as it does in clothes.
Title: Re: Redback refurb for the 3rd time...
Post by: Talisman on October 11, 2009, 05:18:30 PM
I prefer the dowel solution myself, if that does not fix it then time to buy buy.
Title: Re: Redback refurb for the 3rd time...
Post by: Redback Cricket on October 11, 2009, 06:00:11 PM
The 'wet' string is normally used for fixing shoulder cracks.  Like Tom said, you wet the string and wrap it as tightly as you can around the bat - depending on the size/length of the crack, id recomend at least 5-6 inches of the bat should be covered.  As the string dries it contracts, squeezing even tighter.  Some people also knock in some wedges under the string after its been applied to increase the pressure further.
Title: Re: Redback refurb for the 3rd time...
Post by: Howzat on October 11, 2009, 06:06:38 PM
Just peeled tape and scuff sheet off and its not good news, its looking terminal ;)

Pics coming up in 10 mins... looks like it might be one for hitfor6 or even Gary himself...
Title: Re: Redback refurb for the 3rd time...
Post by: Howzat on October 11, 2009, 06:14:51 PM
Worryingly this piece of wood just pulls out
(http://farm3.static.flickr.com/2425/4001241353_df2754b858.jpg)

Image of the toe, note crack at front where wood is now replaced and also crack on the back.
(http://farm4.static.flickr.com/3523/4001240801_365ac061b7.jpg)

Gary's original repair still holding out
(http://farm4.static.flickr.com/3469/4002003726_0f7a57ea5f.jpg)

(http://farm4.static.flickr.com/3531/4002003036_bb2e6fbcdb.jpg)
Title: Re: Redback refurb for the 3rd time...
Post by: musama91 on October 11, 2009, 06:18:29 PM
mate just throw it away. its crying to be sent back to mother nature! and a 16.3 average isnt that good either.
Title: Re: Redback refurb for the 3rd time...
Post by: Master-Basterd on October 11, 2009, 06:19:41 PM
Leo, thats a right state. Save for a new one
Title: Re: Redback refurb for the 3rd time...
Post by: Howzat on October 11, 2009, 06:20:00 PM
mate just throw it away. its crying to be sent back to mother nature! and a 16.3 average isnt that good either.
I want to keep this bat going, and its good for someone who is a bowler
Title: Re: Redback refurb for the 3rd time...
Post by: ianbuchanan on October 11, 2009, 06:20:24 PM
my mate is in the same situation, he has a redback surefire, has had it for about 3 years now, has very similar damage to the toe but continues to use it because it absolutely flies! the ping seems to get better and better!
Title: Re: Redback refurb for the 3rd time...
Post by: Howzat on October 11, 2009, 09:30:55 PM
Is there a specific string i need? Or is common household string ok?
Title: Re: Redback refurb for the 3rd time...
Post by: Talisman on October 11, 2009, 09:50:58 PM
That is a must for cloth tape and resin.
Title: Re: Redback refurb for the 3rd time...
Post by: Howzat on October 13, 2009, 02:01:44 PM
http://www.boots.com/en/Boots-Zinc-Oxide-Plaster-Tape-2.5cm-x-8m_6326/?CAWELAID=334480902&cm_mmc=Shopping%20Engines-_-Google%20Base-_---_-Boots%20Zinc%20Oxide%20Plaster%20Tape%20%2025cm%20x%208m (http://www.boots.com/en/Boots-Zinc-Oxide-Plaster-Tape-2.5cm-x-8m_6326/?CAWELAID=334480902&cm_mmc=Shopping%20Engines-_-Google%20Base-_---_-Boots%20Zinc%20Oxide%20Plaster%20Tape%20%2025cm%20x%208m)

Would that zinc oxide tape be any use as bat tape seems as its non stretch?
Title: Re: Redback refurb for the 3rd time...
Post by: Talisman on October 13, 2009, 09:41:54 PM
I don't know, GN and Salix love it so best ring them and ask them what they use.
Title: Re: Redback refurb for the 3rd time...
Post by: Master-Basterd on October 13, 2009, 10:12:56 PM
[url]http://www.boots.com/en/Boots-Zinc-Oxide-Plaster-Tape-2.5cm-x-8m_6326/?CAWELAID=334480902&cm_mmc=Shopping%20Engines-_-Google%20Base-_---_-Boots%20Zinc%20Oxide%20Plaster%20Tape%20%2025cm%20x%208m[/url] ([url]http://www.boots.com/en/Boots-Zinc-Oxide-Plaster-Tape-2.5cm-x-8m_6326/?CAWELAID=334480902&cm_mmc=Shopping%20Engines-_-Google%20Base-_---_-Boots%20Zinc%20Oxide%20Plaster%20Tape%20%2025cm%20x%208m[/url])

 



I use that for my fingers, very thick stuff, maybe to solid for a bat ?
Title: Re: Redback refurb for the 3rd time...
Post by: Howzat on October 15, 2009, 12:37:12 PM
Repair is going pretty well, have even had time to customise the stickers!
(http://farm4.static.flickr.com/3086/4013416965_2ef19fc012.jpg)
(http://farm3.static.flickr.com/2639/4014182488_5fb58bd6d4.jpg)
Title: Re: Redback refurb for the 3rd time...
Post by: AlRidd on October 15, 2009, 02:35:54 PM
That looks class! Simplistic is the way forward
Title: Re: Redback refurb for the 3rd time...
Post by: GJ on November 01, 2009, 08:31:44 PM
Did you have any luck with the repair? looks a cracking bat!

Please excuse the pun!! :D
Title: Re: Redback refurb for the 3rd time...
Post by: Howzat on November 01, 2009, 08:44:16 PM
Haha Ill get some pictures uploaded soon, the bat came up really well. Crack appears secure but can only be sure after the first game I suppose.