Custom Bats Cricket Forum
Equipment => Bats => Topic started by: psrinivaskarthik on July 24, 2014, 10:41:18 PM
-
Hi,
I have a hard pressed bat [GN100 Scoop], i have knocked in for 6-8 hours, and have been using in nets for few months now.
This bat has not yet "opened-up".
can i use garment steamer's steam on the face of the bat to looses up the wood [hoping to reverse the actions of the hard press done in the factory] ?
they let the bat to air dry for couple of days, oil it and do the knocking in process again.
Will this above mentioned process help speed up the process.
or are there any other suggestions to speed up the process of opening up on hard pressed bats like the new scoop.
Just do not want to give-up on this excellent piece of wood yet.
-
I'm afraid there's no shortcut on this. I too have a hard pressed bat and am loosing all patience with it. >:( May be best to let others use your bat in the nets etc. Apparently the bat will get better the more balls it hits... Though being a forum member I can see a replacement coming soon.
-
Water + cricket bat = bad
-
I'm afraid there's no shortcut on this. I too have a hard pressed bat and am loosing all patience with it. >:( May be best to let others use your bat in the nets etc. Apparently the bat will get better the more balls it hits... Though being a forum member I can see a replacement coming soon.
LOL can see this too....
if i decide to buy a new bat, i will still try the above on Scoop to see what happens.
My Prediction: The face of the bat will swell a tiny bit, but with oiling and knocking it in, should be back normal.
the question here is will it improve the performance ? [Since i am using steam, not water. this process should not have a huge impact on the moisture content in the wood and hence should not degrade the performance; Fingers crossed ??? ]
-
Frankly get it being used. Steam *is* water and will not do your bat any good. Getting it well used will.
Sent from my LG-D802 using Tapatalk
-
Frankly get it being used. Steam *is* water and will not do your bat any good. Getting it well used will.
Sent from my LG-D802 using Tapatalk
With all do respect Tim Steam is not water.
using water is like taking the bat into the swimming pool[or shower], using steam is like taking the bat to a sauna.
i do agree to the point that neither of them are good to the performance of the bat, BUT they are not the same.
-
Technically though steam and water are the same as they share the same chemical compound don't they, they are just in different forms? Just sayin' :)
-
Bunch of cricket badgers say to not steam your bat. My advice is don't steam your bat.
From my understanding true steam is actually invisible. The "Steam" from a garment steamer is actually the water vapor condensing back into tiny droplets of water. So by steaming your bat with a garment steamer you'll be exposing it to numerous smaller drops of water.
Also, with greatest of respect, steam is actually water. Water exists in three states, in it's gaseous state (steam) solid state (Ice) and it's liquid form which is caused by ambient temperature and pressure..
Yeeaaahhh, Science B*tch*s!
-
I can't see that steaming the face will help, it will just make the face swell up, but not deep enough to effect anything.
Wouldn't bother. Send it back if you don't like it?
-
That's exactly right. It's all H2O!!!!
-
Knock it in properly, spend all winter doing it and in winter nets. Come next season it will be sorted and ready to go
-
Knock it in properly, spend all winter doing it and in winter nets. Come next season it will be sorted and ready to go
This is the way! The most responsive bat i've got is the one that I used most through winter nets.
-
Would not recommend use of steam as it could cause the face to swell and possibly split on contact with ball. All bats should open up over time some bats are pressed harder due to warrenties and to prolong there lifespan. Do as already suggested and play the bat in over time.
-
Or it's just a bad bat.
-
My teammate has a scoop . He bought from prodirect. That was hard pressed and after playing for 10-12 games still it's as hard as day 1 with hardly any quality ping. So he is using my spare bat these days .
So sorry to say but it may as well be a bad piece of willow.
-
Just keep using it, drives me mad when after half a season a bat gets labelled a plank
Don't forget if you're only using the bat for a 15 minute net and maybe 50 balls an innings each week it's not actually having that much time being knocked in - keep using the mallet on it too.
It will open up eventually, its just a fact that some bats take longer than others to get going!
-
I agree, I brought a bat off eBay 4-5 seasons ago and it just didn't respond so I went back to an old one for a season and then brought another. Last season I tried it again after doing zero with it other than a few nets and obviously nothing had changed. It felt too hard and lacking any ping despite being a heavy modern thick edged bowed bat.
Since I started visiting this forum I have purchased a heavy mallet and given it a good oil, scuff sheet and another 6 hours or so of knocking and it's starting to come good.
Hate to say it but if you blind purchase off eBay or online like I have you always run the risk of getting a bat that just doesn't suit you or is a dud. It's a trade off you accept for seeking a bargain. It may suit a teammate if you can't be bothered.
-
Return it if you can or whack it silly with a mallet till it comes to life. A heavier mallet would like life much easier.
-
An older bat of mine took a good season and a half to start to come into it's best sit on the bowling machine if you can lots and lots of balls hitting the bat. It seems the steam issue has been clearly stated too haha.