Custom Bats Cricket Forum
Companies => Custom companies => B3 Cricket => Topic started by: procricket on September 26, 2015, 08:28:41 PM
-
Was down at B3 today and saw Streaky latest "Pro" shape which one of our sponsored player has been using and im amazed...
Big bat the one in the picture will be around 2-12 finished and i think we will struggle to get them lighter there may be a few up for sale in various grades soon from 1 stripe upwards.
Think starting weight will be 2-12 at lightest due to amount of wood but pick up wowzers.
Will let the pictures do the talking i think it is a special shape and pick up (I know somebody talked about how can something pick up 2oz lighter but this bat seriously does )
Pick up as good as anything
This is much bigger than the mullanator
First picture bat underneath has edge of 33mm and spine of 54mm
(http://i58.tinypic.com/2hyzdbl.jpg)
Rest
(http://i62.tinypic.com/313lkar.jpg)
(http://i61.tinypic.com/16i61aa.jpg)
(http://i57.tinypic.com/34o2cg9.jpg)
(http://i60.tinypic.com/efrmma.jpg)
(http://i60.tinypic.com/243jl9i.jpg)
(http://i59.tinypic.com/15zgr9s.jpg)
(http://i61.tinypic.com/29bdqjc.jpg)
Although Mr Kadmore has used this for last two months it will be my shape for 2016...
M
-
You say you'll struggle to get one lighter, but what weight would this be with an "average" (400 density?) cleft be, Dave?
-
Not sure streaky gonna go all tech pal as i just picked up the 4 which where made yesterday and today and was amazed pal...
-
It's a lovely shape and an absolute beast!
If you walked out to bat with one of them the opposition wouldn't expect you to be playing delicate shots into the gap!
-
Beastly! When the 1 stripes come up for sale get them on here. I'll add one to me mullanator
-
OMG WOW...
-
How big would the edges/spine of a 2'10 version be Dave?
Sent from my Lenovo B6000-F using Tapatalk
-
Not sure real spec yet as only saw 4 there today and was messing with all black keeping gloves...
I didn't measure the spine streaky will talk about this very soon
-
How big would the edges/spine of a 2'10 version be Dave?
Sent from my Lenovo B6000-F using Tapatalk
Better yet what would the weight be if the spine height remained the same and the edges were reduced to say 35/40mm?
Just think how dreamy that would be, huge spine and loads of wood behind the ball!
-
Thats a super shape, very close to smiley's DW Kaboom. If there's a 1 stripe in 2-12/2-13 I'll like to take one.
-
Not sure real spec yet as only saw 4 there today and was messing with all black keeping gloves...
I didn't measure the spine streaky will talk about this very soon
Pics(and price) of black keepers gloves please!! Any other be softs for 2016?
-
OMG when can I buy??? How much?
-
OMG when can I buy??? How much?
Give streaky a ring monday not sure yet...
Not sure what is avalible but saw some 1 stripe overzied clefts being prepaired weight not sure on available
-
Pics(and price) of black keepers gloves please!! Any other be softs for 2016?
All in good time and yes some of the softs are being modded
-
All in good time and yes some of the softs are being modded
You should no how impatient I and the rest of the forum is by now dave!
-
Will get some pictures up tomorrow pal they are sample ones for now
-
Need a 1 stripe one of those
Sent from my iPhone using Tapatalk
-
I'll take one or three!. :)
-
Will have to start pumping more iron to start wielding beasts like that! Looks great!
-
Looks very similar to the David Warner bat.
-
Was considering a mullanator but that is my next purchase!
-
@procricket b3 I hope this won't be over dried to achieve the 50mm edge.
-
Nope we don't overdry any cleft at all and never have it goes against the way we operate with cleft density :D
-
@Joy Marvin. .. only Asian bat makers do overdry their willow to make big bats in a low weight range.. ;)
-
Thats huge. Too heavy for me. Happy with my 3 B3s(http://images.tapatalk-cdn.com/15/09/27/4da25ed827892d2bdef4d1249f308584.jpg)
-
@sarg Maybe it's just goldilocks syndrome, but I really like the one in the middle!
-
What are the shaped going from left to right?
-
Also I bet the bats will be priced higher than a normal 1 stripe bat as they'll be oversized clefts I'd have thought.
-
Also I bet the bats will be priced higher than a normal 1 stripe bat as they'll be oversized clefts I'd have thought.
Boo.
-
Hold on oversized clefts are not more expensive we have had oversized clefts used for the mullanator and they where the same price..
Please hold your horses Streaky will be speaking on this very soon prices should be standard custom
-
That's good to hear, I just assumed with it being more wood meaning more money. Apologies
-
What are the shaped going from left to right?
Left Db2 2.9 , Middle Bespoke 2.95, Right Long Handled shortened Tonto Butterfly 2.105. GM grips are about 2.2 ounces on each bat with, some grip off cut under the handle to make the pickup even lighter.
Middle was designed by Adelaide, AUS rep Andrew Duffield. Streaky apparently reckons its a new Db1, but its only got a 1mm scope and a bit more wood higher above the meat.
(http://images.tapatalk-cdn.com/15/09/27/614d29303bf63e52db8d257cb4ed5d48.jpg)
(http://images.tapatalk-cdn.com/15/09/27/7a4c24aa13e6407c5e1e1d3fa1946645.jpg)
(http://images.tapatalk-cdn.com/15/09/27/4102447d1a942982f13d5cc880b07493.jpg)
-
Be interesting to know how long your gloves last, got a pair for my lad, used at indoor nets only, worn through on two of the fingers before even playing a game... so, we have virtually brand new gloves, useless to him. Had to get other gloves - another brand - when B3 didn't replace. Best of luck.
-
Be interesting to know how long your gloves last, got a pair for my lad, used at indoor nets only, worn through on two of the fingers before even playing a game... so, we have virtually brand new gloves, useless to him. Had to get other gloves - another brand - when B3 didn't replace. Best of luck.
Sorry to hear this it doesnt sound like our customer service we replace faulty softs..
Please pm me and i will see what i can do.
We have had not many issue with the older style softs which are pictured and our new softs
-
PM sent.
Sorry to hear this it doesnt sound like our customer service we replace faulty softs..
Please pm me and i will see what i can do.
We have had not many issue with the older style softs which are pictured and our new softs
-
Hopefully I will cover all questions, but if I have missed anything please let me know and I will answer.
"Project Pepsi"
The idea was simple; to get a big bat light, after my magicians hat would only magic white rabbits and not willow I had to put my thinking cap back on and create a design that was big (and had an associated heavy dead weight) but actually felt light in the hands.
By playing around with the Centre of Gravity (COG) we have got to an "optimum" size vs pick up ratio, (the higher the COG the lower the Moment of inertia - the easier it is to rotate (swing)). As this bat is so big, the middle has to be high, but when you compare it to a “normal – mid swelled bat” there is still more volume lower down in the “pepsi”
Vital Statistics;
Weight start from 2lb 12.5oz – average weight would be 2lb 14oz, and can go up to 3lb 6oz Bear in mind that due to the design these “pick up” approx 2oz lighter (I would say a little more like 3oz)
Price – same as our normal bats (SERIES)
We have 6 currently being made in the factory for the showroom, we had one in the showroom but the first person that came in and saw it brought it.
If you have any further questions, please don’t hesitate to ask.
Streaky
-
Hopefully they'll be some in the showroom when I come down to drop this years bat off for its refurb @The Doctor . Might be too heavy for me but you never know! :)
-
Streaky, if any come out in the 3.2 or bigger weight, let me know. Wady is after a new one!
-
So you can get one of these bad boys for 150?
-
Hopefully I will cover all questions, but if I have missed anything please let me know and I will answer.
"Project Pepsi"
The idea was simple; to get a big bat light, after my magicians hat would only magic white rabbits and not willow I had to put my thinking cap back on and create a design that was big (and had an associated heavy dead weight) but actually felt light in the hands.
By playing around with the Centre of Gravity (COG) we have got to an "optimum" size vs pick up ratio, (the higher the COG the lower the Moment of inertia - the easier it is to rotate (swing)). As this bat is so big, the middle has to be high, but when you compare it to a “normal – mid swelled bat” there is still more volume lower down in the “pepsi”
Vital Statistics;
Weight start from 2lb 12.5oz – average weight would be 2lb 14oz, and can go up to 3lb 6oz Bear in mind that due to the design these “pick up” approx 2oz lighter (I would say a little more like 3oz)
Price – same as our normal bats (SERIES)
We have 6 currently being made in the factory for the showroom, we had one in the showroom but the first person that came in and saw it brought it.
If you have any further questions, please don’t hesitate to ask.
Streaky
All sounds good to me.
Just wondered what you meant by Average Weight - 400 density? and is the start weight determined by keeping to 50mm edge? Could you for example have a 45mm version at a lighter weight or a harrow length version at 2'11?
-
So you can get one of these bad boys for 150?
Series 1 stripe is currently that price pal :D
-
Theoretically too heavy for me - I'd like to see one though! ;)
-
Hopefully I will cover all questions, but if I have missed anything please let me know and I will answer.
"Project Pepsi"
The idea was simple; to get a big bat light, after my magicians hat would only magic white rabbits and not willow I had to put my thinking cap back on and create a design that was big (and had an associated heavy dead weight) but actually felt light in the hands.
By playing around with the Centre of Gravity (COG) we have got to an "optimum" size vs pick up ratio, (the higher the COG the lower the Moment of inertia - the easier it is to rotate (swing)). As this bat is so big, the middle has to be high, but when you compare it to a “normal – mid swelled bat” there is still more volume lower down in the “pepsi”
Vital Statistics;
Weight start from 2lb 12.5oz – average weight would be 2lb 14oz, and can go up to 3lb 6oz Bear in mind that due to the design these “pick up” approx 2oz lighter (I would say a little more like 3oz)
Price – same as our normal bats (SERIES)
We have 6 currently being made in the factory for the showroom, we had one in the showroom but the first person that came in and saw it brought it.
If you have any further questions, please don’t hesitate to ask.
Streaky
Hi Streaky,
What's your thoughts on bowing the blade. Does this improve pickup? If it does how come didn't use this?
Marc
-
All sounds good to me.
Just wondered what you meant by Average Weight - 400 density? and is the start weight determined by keeping to 50mm edge? Could you for example have a 45mm version at a lighter weight or a harrow length version at 2'11?
Hi Nick,
Yup - average weight 400 density.
We can change the model anyway you like, but that then wont be a SERIES shape and cost you a little bit more (£50) for a BESPOKE design. You can however go to Harrow width / super short blade/LH and that will loose you approx 2 to 3 oz.
-
Streaky, if any come out in the 3.2 or bigger weight, let me know. Wady is after a new one!
Chris,
Wont be a problem getting one that weight - bat makers dream.
-
Hi Streaky,
What's your thoughts on bowing the blade. Does this improve pickup? If it does how come didn't use this?
Marc
No evidence or theory to suggest bow improves pick up. The bat is theoretically a "BEAM" and uses COG x distance from pivot point calcs, which bow does not effect. I have heard this one before however but think it is an urban myth / old wives tale.
-
Hi Nick,
Yup - average weight 400 density.
We can change the model anyway you like, but that then wont be a SERIES shape and cost you a little bit more (£50) for a BESPOKE design. You can however go to Harrow width / super short blade/LH and that will loose you approx 2 to 3 oz.
Cheers Streaky, sounds like a plan ;-)
Sent from my Nexus 5 using Tapatalk
-
So the edge size and shape would remain the same size no matter what size density you choose, I'd have to have a 2lb13oz one as I'm no Conan!
-
Wow...I would definitely love to have one of those in my hands.
Horizontal bats shots such as the cut or the pull would be almost impossible with a bat that size unless the batsman has tree trunks for arms!!
-
This density talk always confuses me, and I work with numbers all day lol. So simply can you get these in a normal weight of say 2.9 or 2.10 but with say 44mm edges as an example of would that not be the "Pepsi" shape?
-
How much for this 50mm beast please
-
How much for this 50mm beast please
(http://i61.photobucket.com/albums/h76/smilley792/C4808DE6-C2A1-4D9B-9A32-1C1CA8E4CB55_zpsgjkqwrhd.png) (http://s61.photobucket.com/user/smilley792/media/C4808DE6-C2A1-4D9B-9A32-1C1CA8E4CB55_zpsgjkqwrhd.png.html)
-
Cheers dude that's good value for a top range blade
-
Hi Chaps,
Keep on getting emailed the same questions, so thought a post on here would help.
These are only available in grades 1, 2 and 3, we do not have, and cannot get any in butterfly.
Miniumum weight for this bat is 2lb 12.5 oz and as discussed these do pick up a lot lighter.
You can alter the design (shape) as much as you like to get the weight down a little further, but this would be a BESPOKE design and would cost you an addition 50 pounds on the prices above that Chris has added (thanks mate).
If you want the same design but lighter, we can do the normal indian/pakistan tricks by making the bat thinner - harrow width (104mm) or have a shorter blade/LH.
I have made 6 of these for the showroom that I will pop up on here - grade/weight etc that you can pick from or we can obviously make to order no problem.
If you have any questions best to pop it on here - that way if somebody has a similar question they can have it answered straight away ;-)
Streaky
-
This density talk always confuses me, and I work with numbers all day lol. So simply can you get these in a normal weight of say 2.9 or 2.10 but with say 44mm edges as an example of would that not be the "Pepsi" shape?
Without altering the design I cannot say howmuch you would loose - but you would obviously make it lighter as you are removing Mass out of the design by taking the edge down to 45mm. This would be your bespoke design and not a TKC shape.
-
I think I can say (with some confidence) speaking on behalf of everyone that we really just want to see pics and drool over them :D
-
I think I can say (with some confidence) speaking on behalf of everyone that we really just want to see pics and drool over them :D
Hear, Hear!
-
The Monster Profile shot:
(http://i62.tinypic.com/rkx3zk.jpg)
The Grains
(http://i58.tinypic.com/2j5f21g.jpg)
(http://i59.tinypic.com/11jokl2.jpg)
(http://i60.tinypic.com/3479sok.jpg)
(http://i60.tinypic.com/244bcbm.jpg)
(http://i58.tinypic.com/8z3cp0.jpg)
(http://i58.tinypic.com/xfuh44.jpg)
The weights, these are fresh of production so have not been gripped or stickered;
2'12.2oz
2'12.1oz
2'11.6oz
2'14.1oz
2'14.1oz
2'12.4oz
All are 2 stripes so cost £240 plus postage, they are currently in the showroom so I cant imagine them being around for long so if you want one give me a call 0115 9770198, first come first served.
Streaky
-
The Monster Profile shot:
([url]http://i62.tinypic.com/rkx3zk.jpg[/url])
The Grains
([url]http://i58.tinypic.com/2j5f21g.jpg[/url])
([url]http://i59.tinypic.com/11jokl2.jpg[/url])
([url]http://i60.tinypic.com/3479sok.jpg[/url])
([url]http://i60.tinypic.com/244bcbm.jpg[/url])
([url]http://i58.tinypic.com/8z3cp0.jpg[/url])
([url]http://i58.tinypic.com/xfuh44.jpg[/url])
The weights, these are fresh of production so have not been gripped or stickered;
2'12.2oz
2'12.1oz
2'11.6oz
2'14.1oz
2'14.1oz
2'12.4oz
All are 2 stripes so cost £240 plus postage, they are currently in the showroom so I cant imagine them being around for long so if you want one give me a call 0115 9770198, first come first served.
Streaky
Wow they're amazing, any 1 stripes ? And can we see a picture of the toe up?
Sent from my iPhone using Tapatalk
-
1 Stripes will be made to order, just a note - these will be extremely limited however.
Profile shot
(http://i59.tinypic.com/2zog8wm.jpg)
-
How light could you realistically get a 1 stripe Streaky?
-
How light could you realistically get a 1 stripe Streaky?
2lb13oz > 2lb 14oz
-
2lb13oz > 2lb 14oz
And picks up super light... So, just a phone call is required I take it? ;) Also, how high is the spine? Cheers
-
How many mm of concaving? looks like 6?
-
@The Doctor will any be made up in 3 stripe or would they have to be specially ordered?
-
And picks up super light... So, just a phone call is required I take it? ;) Also, how high is the spine? Cheers
80+ mm
Just a phone call away......
-
How many mm of concaving? looks like 6?
You've got a good eye.....
-
@The Doctor will any be made up in 3 stripe or would they have to be specially ordered?
We would make them to Order.
We have a few oversized crowns in - so would be able to get it at 2lb 10.5oz
-
We would make them to Order.
We have a few oversized crowns in - so would be able to get it at 2lb 10.5oz
a monster like that in 2lb10.5? :o
My mind says yes, a bat like that will make sure I score thousands of runs next year! (That's how it works, right?)
My wallet however, is running for the hills :(
-
No evidence or theory to suggest bow improves pick up. The bat is theoretically a "BEAM" and uses COG x distance from pivot point calcs, which bow does not effect. I have heard this one before however but think it is an urban myth / old wives tale.
This is another reason why I like B3
-
a monster like that in 2lb10.5? :o
My mind says yes, a bat like that will make sure I score thousands of runs next year! (That's how it works, right?)
My wallet however, is running for the hills :(
It's all about mind of matter......
-
We would make them to Order.
We have a few oversized crowns in - so would be able to get it at 2lb 10.5oz
:o 2.10.5. If I sell my Screaming Cat I am going to buy a 3 stripe Pepsi
-
Crown willow, isnt that like 450gbp?
-
that bat looks amazing. if i clear out some of my kit i might end up purchasing one
-
Crown willow, isnt that like 450gbp?
Think it was 500 last time I asked.
-
Think it was 500 last time I asked.
If I ever buy a 500 pound bat please drop me off at the nearest looney bin
-
If I ever buy a 500 pound bat please drop me off at the nearest looney bin
Before or after you've knocked the bat in?
-
If I ever buy a 500 pound bat please drop me off at the nearest looney bin
Only if you sign the control of your estates(and most importantly cricket bats) over to me first.
-
@Doctor don't know if its been asked already but what's the reason behind the name "Pepsi"?
Crown willow at 2'10!!! :o and 80+ mm spine :o :o :o :o :o now that's worth the money
-
Surely something that big and light will explode into smithereens upon first contact?
-
If I ever buy a 500 pound bat please drop me off at the nearest looney bin
Sold 2 today (to the same person.......) :-)
-
@Doctor don't know if its been asked already but what's the reason behind the name "Pepsi"?
Crown willow at 2'10!!! :o and 80+ mm spine :o :o :o :o :o now that's worth the money
It is the same shape as Tom KOHLER (Cola) Cadmore uses (Worcestershire CCC) - Pepsi is his nick name.
-
Surely something that big and light will explode into smithereens upon first contact?
Not at all, it would if we dried them to an inch of their life, but all our clefts are kept at the optimum Moisture content.
-
Sold 2 today (to the same person.......) :-)
Local or forum member Streaky?
My money is on @Chad based on @smilley792 earlier comment
-
Local or forum member Streaky?
My money is on @Chad based on @smilley792 earlier comment
Reasonably Local - Birmingham (non Forum) though!
Have a cracking weekend chaps, and enjoy the October Sunshine.
Streaky
-
You've got a good eye.....
more like an unhealthy obsession...and an ever diminishing wallet. luckily, I am a weakling, and so won't be tempted by this behemoth
-
Not at all, it would if we dried them to an inch of their life, but all our clefts are kept at the optimum Moisture content.
Interesting.. :)
-
So need one of these now
Shame the crown grade is £500 too much for my price range right now
-
So need one of these now
Shame the crown grade is £500 too much for my price range right now
My last B3 crown was purchased for £500 [emoji16]
-
exactly, its £500 too much
-
Emailed you, Doc.
-
Streaky I emailed you as well. :)
-
Speaking from experiences knocking in many bats and owning my own B3 bats that are not even top of the range you cannot go wrong.
Earlier ones were a bit to stiff on the press, but with that sorted and the finishing top shelf, any bat you buy from the boys will make you runs and require minimal preparation.
I have been knocking in players bats as a hobby now for 18 monthd and know the difference in bats. i've had some great ones through eg GN Legends, TON Special Reserve, Kookaburra players, Spartans, BDM, SS, Newbery, etc, etc, and the B3s are top shelf. Handles are set dead straight, binding and inserts good quality and willow great. Sure others have bigger edges, but i know their drier or under pressed to create that size.
If the Pepsi is 55mm it would be 57-58 in subcontinent bat ranges, possibly overdried and poorly bound.
If you want a big fat bat, don't hesitate on a B3. It wont let you down.
-
Emailed you, Doc.
Replied - I think....
-
Streaky I am emailed you as well. :)
We have a couple of 2 stripes that meet your requirments Amrit that have been posted on this thread.
-
We have a couple of 2 stripes that meet your requirments Amrit that have been posted on this thread.
These are some lovely sticks @The Doctor but will be great if you can find a 1 stripe cleft for me in the shelves.
-
These are some lovely sticks @The Doctor but will be great if you can find a 1 stripe cleft for me in the shelves.
We dont have any 1 stripe oversized clefts with very low density in stock to make. We wont be getting anymore oversized clefts in until the new year.
-
Doc @The Doctor received my TKC Pepsi bat last evening, simply awed with it, cannot tell you how happy I am. Guys here's a teaser for you, the B3 is next to my SS Gladiator with 44/45mm edges and the B3 just dwarfs it. Will do a review soon.
(http://i1313.photobucket.com/albums/t542/amritpremi/Mobile%20Uploads/20151102_170740_zpsl3ljo89k.jpg)
-
What is the weight of B3 bat ? 50mm edge size is really massive !!
-
I used mine on the weekend: opened the batting and scored 48 off 22 including one of the biggest 6's of my life (a flick off leg stump over square leg: around 75 meters I reckon). As I wanted an oval handle, Streaky had to put more meat up around the shoulders... It picks up better than my Warner Edition!
-
I used mine on the weekend: opened the batting and scored 48 off 22 including one of the biggest 6's of my life (a flick off leg stump over square leg: around 75 meters I reckon). As I wanted an oval handle, Streaky had to put more meat up around the shoulders... It picks up better than my Warner Edition!
@Wickets-then-runs I think the Forum needs to see pictures.....
-
@thedoctor would the oval handle requiring more meat up the blade mean it would cost extra as a bespoke?
-
@thedoctor would the oval handle requiring more meat up the blade mean it would cost extra as a bespoke?
It would the very first design as it is a bespoke design - after this would be a SERIES
-
Does this mean we can nick @Wickets-then-runs' design without having to pay the extra Bespoke cost? :-[
-
Does this mean we can nick @Wickets-then-runs' design without having to pay the extra Bespoke cost? :-[
Only if @Wickets-then-runs says it OK!!
-
Happy to share guys! I will get pics up tomorrow: it is a work of art!
-
Only if @Wickets-then-runs says it OK!!
my pleasure chaps! It has REALLY made a difference to the pick up! I had a Laver made at the same weight and profile but this picks up even than that!
-
Any updates to this at all?
Sent from my LG-H815 using Tapatalk
-
I'm waiting on my small edges Warner profile bat to arrive from B3 and will do a review and comparison on both!
loving the Pepsi, by the way! :D
-
Used mine in nets last night for first time! ( well the edges) a lot of people stood gawping at the size of it, and the uselessness of it's owner!
-
I'm waiting on my small edges Warner profile bat to arrive from B3 and will do a review and comparison on both!
loving the Pepsi, by the way! :D
Sorry I did see yours the other day and it was the pictures one a great bat pal in every sence I loved it
-
These things are huge! I thought my B3 SCAT replica was a giant for the weight. I just need a bat to break to justify another purchase I think. At the moment I haven't even used the SCAT replica as the other B3 I use is too good. They are both crown willow so huge for the weight. Can just imagine one of these puppies with an oversized crown cleft.
-
Sorry to bring this back from the dead but @procricket, whats the main difference with this and the 50+. It looks like the spine towards the handle is a little more scolloped...
-
Sorry to bring this back from the dead but @procricket, whats the main difference with this and the 50+. It looks like the spine towards the handle is a little more scolloped...
scooping (which is why this supposedly picks up really nicely), and less of a bow.
-
Plenty of wood in the area it's needed, can't justify a new purchase yet when my other b3 is going so well keep the good work up lads !
-
This is definitely my next purchase, do I just ask for a Pepsi when I call up or did you make any additional changes?
-
This is definitely my next purchase, do I just ask for a Pepsi when I call up or did you make any additional changes?
Make sure you tell them tht you want TKC pepsi with 50+mm edge. The standard TKC pepsi is 40mm edge & 68mm spine.
I ordered a 50mm edge TKC but got a 40mm edges.. Kept it as it has a awesome ping.
-
Could this possibly get down to 2.10?
-
Could this possibly get down to 2.10?
I would very much doubt it.
-
Could this possibly get down to 2.10?
depends on avaliblity of low density oversized clefts and the exact size required mate best to give @The Doctor a pm mate