Custom Bats Cricket Forum
Companies => Custom companies => B3 Cricket => Topic started by: Vicbats on March 01, 2019, 11:50:42 PM
-
Here are my 2 b3 bats
Bat 1
Chris Lynn profile
Mid high sweet spot
54mm edge
77mm spine
21mm toe
3:1.1 lbs
106.8 mm width
Profile no 7158
Really nice for the weight in the bat, feels like a 2.13-2.14 pics to come
Bat 2
Mid high profile
40mm edge
74mm spine
22mm toe
2:14.3 lbs
Nice in the hands, it feels its weight
Profile no 7291
Both had to be made from oversized clefts in 3 stripe grade.
Bat 3 is a 1271 profile which I have to wait until Monday for delivery asked for 2.12 believe I have got what I asked for. Can highly recommend b3 for the service, had a few problems along the way but all soughted within reasonable timeframe.
-
Where are the pictures?
This forum has 2 rules.
Forum Rule 1: if there is no picture then it doesn’t exist.
Forum Rule 2 : Please refer to Rule 1.
-
@Vicbats I guess you like a nice heavy bat, that Chris Lynn shape looks a beast. What density clefts were these?
-
Yeah like a nice heavy bat. Don't know what density they come in, never thought about it when I bought the bat. @Butterfingerz knows the bats
-
(https://i.imgur.com/2lbaed0.jpg)
(https://i.imgur.com/hiBr0NV.jpg)
(https://i.imgur.com/SPyI67C.jpg)
(https://i.imgur.com/AOMuDRn.jpg)
(https://i.imgur.com/AYF67Oi.jpg)
(https://i.imgur.com/WjOPmWc.jpg)
(https://i.imgur.com/qZ6gn4a.jpg)
(https://i.imgur.com/XsBMbsf.jpg)
-
(https://i.imgur.com/olijc29.jpg)
(https://i.imgur.com/MQmnuvM.jpg)
(https://i.imgur.com/8Lvj4tD.jpg)
Here is the Trott profile
23mm shoulder
35mm edge
30mm middle toe
23mm edge toe
64mm spine
2:11.8 lbs dressed
-
Its not a big fuss for me what colour they are, if they had a Aussie flag b3 sticker I would go for that @AJ2014 . Yeah the Trott profile feels good in the hands for the amount of wood it has.
-
@Vicbats @Chalkie
The Density was 373 with a finished weight (when it left the factory ) of 2'12.1 the ping was very responsive and a great pickup for a bat of its weight too.
-
@Butterfingerz I think he was asking about the other 2 bats
-
The bat 7158 was a density of 411 and the bat 7291 was 405
-
Apologies if this has been covered elsewhere @Butterfingerz but how is the density figure calculated? Actually, perhaps I should rephrase that a little - what is the unit of measurement that goes with the figure? Does 405 refer to grams per cubic cm? Or is it getting into something far too technical for my Luddite brain to comprehend?!
-
Apologies if this has been covered elsewhere @Butterfingerz but how is the density figure calculated? Actually, perhaps I should rephrase that a little - what is the unit of measurement that goes with the figure? Does 405 refer to grams per cubic cm? Or is it getting into something far too technical for my Luddite brain to comprehend?!
Its an 'in-house' figure calculated between the weight of the pre-machines blade against the volume.
-
I see, say no more ;)
-
Its an 'in-house' figure calculated between the weight of the pre-machines blade against the volume.
Yep, it makes sense, think Morgan's bat's density is 374 or something close to that, someone said that on his bat's thread
-
First hit with the Trott profile and all I can say is the middle is huge, not the most powerful bat I have used but the middle is practically the whole bat. So miss shots still go like a rocket ( we play on synthetic grass so the bounce is not always consistent).
-
I have ordered another trott profile in 3 stripe 2.10. Cleft density is 349 hope to get pics up soon when I get the bat.
-
Lynn bat sold