Cleaning up one of my bats and I'm halfway through. However I've got some problems:-
1. Big surface crack in the middle that's taken a little of the surface off
2. Left over fibre tape gunk at the bottom of the bat
3. Some glue/dents at the top
4. Wondering how to finish it off, wax/fine sanding?
1. Either sand it out or dont. Maybe spread a bit of wood glue over it for stability. Unless the crack is deep, don't be too worried.
2. As said, white spirit/any solvent that works.
3. Solvent on glue. Try sanding dents if you want, but probably not worth the trouble.
4. Continue sanding until you are happy with the finish. A really fine finish although nice, is pretty pointless. Thin coat on oil if you think it necessary. Also check knocking in if you have sanded much from the face.
Author
Topic: Next steps on a refurb (Read 991 times)