Advertise on CBF

Author Topic: Machining and pressing.  (Read 1162 times)

0 Members and 1 Guest are viewing this topic.

buddyb

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 155
  • Trade Count: (0)
Machining and pressing.
« on: January 02, 2014, 06:15:36 PM »
So today, I've finally had the chance to get into my man cave and work on a few bits and pieces. Today's aim was to make some new jigs to machine the blades and to do some pressing. Only a gentle bow to the blade. (Also before someone says there is a split near the handle but it's on the surface and will be gone when I start drawing the shape)
 
Logged
RobertJames cricket @RobertJamescric

Number 11

  • County 1st XI
  • ***
  • Offline Offline
  • Posts: 516
  • Trade Count: (0)
Re: Machining and pressing.
« Reply #1 on: January 03, 2014, 01:33:53 AM »
Be nice to see your jig for cutting in the splice. I'm imagining a two piece pivoting affair with stop pins and clamps etc.
Logged

yogi206

  • County 2nd XI
  • ***
  • Offline Offline
  • Posts: 330
  • Trade Count: (+1)
  • Part-time Pete
Re: Machining and pressing.
« Reply #2 on: January 03, 2014, 07:18:35 AM »
looks very good, is that a ban saw you are using ?
Logged

buddyb

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 155
  • Trade Count: (0)
Re: Machining and pressing.
« Reply #3 on: January 03, 2014, 09:50:15 PM »
Quote from: Number 11 on January 03, 2014, 01:33:53 AM
Be nice to see your jig for cutting in the splice. I'm imagining a two piece pivoting affair with stop pins and clamps etc.

The blade splicing jig is very simple. I would be amazed at home simple it is. I will upload an imagine at some point. Same with the handle. And yes it's a bandsaw I'm using with a 20mm blade.
Logged
RobertJames cricket @RobertJamescric
 

Advertise on CBF