Advertise on CBF

Author Topic: Crack in shoulder  (Read 1461 times)

0 Members and 1 Guest are viewing this topic.

Wooly

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 164
  • Trade Count: (0)
Crack in shoulder
« on: January 09, 2016, 03:30:48 AM »
Picked up this bat a while ago but haven't used it in anger yet.  Wondering whether I need to do anything about this crack in the shoulder.  It doesn't seem deep & hasn't opened up so I probably wouldn't be able to get any glue into it.  Should I bother or just leave it?





Logged

Blank Bats

  • Forum Sponsor
  • International Captain
  • *****
  • Offline Offline
  • Posts: 1158
  • Trade Count: (+20)
    • Blank Bats
Re: Crack in shoulder
« Reply #1 on: January 09, 2016, 07:46:03 AM »
Put a bit of glue into it if at all possible, once dry, sand and tape with fibre glass tape.
Logged
Blank Bats
http://www.blankbats.co.uk
For more info email blankbats@gmail.com

Ryan

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 4555
  • Trade Count: (+17)
Re: Crack in shoulder
« Reply #2 on: January 10, 2016, 07:37:41 AM »
I would leave that as it is. You'd struggle to get any glue in anyway. The likelihood of it getting and worse is slim with it being so high on the blade.

Sent from my SM-G925F using Tapatalk

Logged

Batbuddy99

  • County 1st XI
  • ***
  • Offline Offline
  • Posts: 925
  • Trade Count: (0)
  • https://royalascotcc.co.uk
Re: Crack in shoulder
« Reply #3 on: January 10, 2016, 09:55:25 AM »
Just wrap a bit if fibreglass tape round the blade in that area to cover it, then just leave it because of Ryan's reasons


Sent from my iPhone using Tapatalk
Logged
Still working on turning massive netting potential into real match runs

Seniorplayer

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 6236
  • Trade Count: (0)
Re: Crack in shoulder
« Reply #4 on: January 10, 2016, 10:45:34 AM »
Wouldnt bother with glue as suggested leave it or apply 1 wrap of fibre glass
Logged

WalkingWicket37

  • International Superstar
  • *******
  • Offline Offline
  • Posts: 12983
  • Trade Count: (+26)
Re: Crack in shoulder
« Reply #5 on: January 10, 2016, 11:20:22 AM »
Thats superficial, no need to glue or tape it really.

If you really want to do something for peace of mind, some liquid superglue would get right into that, sealing the crack. Simply dab it on over the crack, let gravity do it's thing and don't touch it until it's 100% dry! Once that has dried use a fine grade of sandpaper to tidy up the glued area.

Alternatively put a strip of tape over it. Out of sight, out of mind.
Logged
 

Advertise on CBF