Topic: Minor Toe Damage - How would you fix it? (Read 3391 times)

LBWCandidate · « **on:** March 30, 2019, 09:22:21 PM »

What would be the recommended approach?

https://imgur.com/zP8qGHH

HellomynameisJ · « **Reply #1 on:** March 30, 2019, 10:58:24 PM »

Runny super glue and clamp overnight

Cover_Drive · « **Reply #2 on:** March 31, 2019, 03:07:25 AM »

And then put shoegoo...

jayralh · « **Reply #3 on:** March 31, 2019, 09:10:21 AM »

Use a saw to round toe off then finish with sanding following shoe goo if you like.

Gurujames · « **Reply #4 on:** March 31, 2019, 09:13:10 AM »

I would inject PVA glue into the cracks with needle and syringe , parcel tape overnight then sand. I would not go anywhere near it with a saw.

jayralh · « **Reply #5 on:** March 31, 2019, 09:30:00 AM »

I done mine with saw, came out perfect. Thats personal choice end of the day

Yorkershire · « **Reply #6 on:** March 31, 2019, 11:08:05 AM »

That's gone mate... new bat!!!

Red Ink Cricket · « **Reply #7 on:** March 31, 2019, 11:50:46 AM »

Very simple repair. As James says, glue tape sand.

Could fit a toe guard after I�d you wanted but that all depends on preference

Komdotkom · « **Reply #8 on:** March 31, 2019, 09:27:02 PM »

Do you think bats with very square toes are more susceptible tot this type of damage? I've got a couple with very square corners and they all have this type of damage, but the 'rounder' ones like my Aldred don't seem to?
I've been considering making a template and giving them all the same toe shape/angle as the Aldred.
I just superglue them as suggested above and then make an epoxy toe guard from West 105

brokenbat · « **Reply #9 on:** March 31, 2019, 10:30:32 PM »

Quote from: Komdotkom on March 31, 2019, 09:27:02 PM

Do you think bats with very square toes are more susceptible tot this type of damage? I've got a couple with very square corners and they all have this type of damage, but the 'rounder' ones like my Aldred don't seem to?
I've been considering making a template and giving them all the same toe shape/angle as the Aldred.
I just superglue them as suggested above and then make an epoxy toe guard from West 105

Yes, the edges and corners of square toes are more brittle

InternalTraining · « **Reply #10 on:** April 01, 2019, 12:32:07 AM »

Quote from: LBWCandidate on March 30, 2019, 09:22:21 PM

This is just toe feathering. Search CBF for "feathering" and you will find several posts...

In large scheme of things, it is not a big deal and happens to bats all the time.

LBWCandidate · « **Reply #11 on:** April 01, 2019, 02:11:00 AM »

Followed the advice here.
Used glue/clamp followed by sanding next day.
Will use shoe goo now instead of toe guard.

SD · « **Reply #12 on:** April 01, 2019, 12:20:09 PM »

Quote from: Komdotkom on March 31, 2019, 09:27:02 PM

Do you think bats with very square toes are more susceptible tot this type of damage? I've got a couple with very square corners and they all have this type of damage, but the 'rounder' ones like my Aldred don't seem to?
I've been considering making a template and giving them all the same toe shape/angle as the Aldred.
I just superglue them as suggested above and then make an epoxy toe guard from West 105

I think you are more likely to see a chunk of the toe break off with a square toe as it is a weak point, but I have experienced feathering with every bay shape I have ever used. If anything I think it was more common on older bats which generally could withstand more damage than today's lower density blades which seem to suffer terminable damage with greater frequency

Seniorplayer · « **Reply #13 on:** April 02, 2019, 08:03:39 AM »

Quote from: SD on April 01, 2019, 12:20:09 PM

I think you are more likely to see a chunk of the toe break off with a square toe as it is a weak point, but I have experienced feathering with every bay shape I have ever used. If anything I think it was more common on older bats which generally could withstand more damage than today's lower density blades which seem to suffer terminable damage with greater frequency

To help avoid feathering shape the toe so that the back of the bat toe is slightly longer than the face as this keeps the face of the toe off the ground.

jayralh · « **Reply #14 on:** April 03, 2019, 11:24:43 AM »

Quote from: Seniorplayer on April 02, 2019, 08:03:39 AM

To help avoid feathering shape the toe so that the back of the bat toe is slightly longer than the face as this keeps the face of the toe off the ground.

Thats exactly what you have done with my bat. Now I know why,I will try to copy that on my other bat

Author Topic: Minor Toe Damage - How would you fix it? (Read 3391 times)

LBWCandidate

Minor Toe Damage - How would you fix it?

HellomynameisJ

Re: Minor Toe Damage - How would you fix it?

Cover_Drive

Re: Minor Toe Damage - How would you fix it?

jayralh

Re: Minor Toe Damage - How would you fix it?

Gurujames

Re: Minor Toe Damage - How would you fix it?

jayralh

Re: Minor Toe Damage - How would you fix it?

Yorkershire

Re: Minor Toe Damage - How would you fix it?

Red Ink Cricket

Re: Minor Toe Damage - How would you fix it?

Komdotkom

Re: Minor Toe Damage - How would you fix it?

brokenbat

Re: Minor Toe Damage - How would you fix it?

InternalTraining

Re: Minor Toe Damage - How would you fix it?

LBWCandidate

Re: Minor Toe Damage - How would you fix it?

SD

Re: Minor Toe Damage - How would you fix it?

Seniorplayer

Re: Minor Toe Damage - How would you fix it?

jayralh

Re: Minor Toe Damage - How would you fix it?