Oiling New Bat
Advertise on CBF

Poll

What part of a new bat do you oil?

All over
- 16 (69.6%)
Face and edges up to labels
- 6 (26.1%)
Other
- 1 (4.3%)

Total Members Voted: 23

Author Topic: Oiling New Bat  (Read 2592 times)

0 Members and 1 Guest are viewing this topic.

Grubby

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 237
  • Trade Count: (0)
Oiling New Bat
« on: June 03, 2020, 06:51:11 PM »
A friend and I have had a discussion on oiling a new bat. We have differences. What do people do to theirs?
Logged

WalkingWicket37

  • International Superstar
  • *******
  • Offline Offline
  • Posts: 12983
  • Trade Count: (+26)
Re: Oiling New Bat
« Reply #1 on: June 03, 2020, 06:53:36 PM »
Oil it all over, then knock it in, then apply a scuff sheet.
Logged

GDP1964

  • County 1st XI
  • ***
  • Offline Offline
  • Posts: 779
  • Trade Count: (0)
  • GDP
Re: Oiling New Bat
« Reply #2 on: June 03, 2020, 07:18:07 PM »
Bat Wax is they way I go
Logged

potzy248

  • International Captain
  • ****
  • Offline Offline
  • Posts: 1679
  • Trade Count: (+1)
Re: Oiling New Bat
« Reply #3 on: June 03, 2020, 08:15:00 PM »
Never Oil my bats.
Logged
Kane Williamson for Prime Minister.

Canners

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 5085
  • Trade Count: (+10)
  • go hard or go home
Re: Oiling New Bat
« Reply #4 on: June 03, 2020, 08:19:41 PM »
Never oil mine tbh
Logged
I don't know how to put this, but, I'm kind of a big deal.

Canners

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 5085
  • Trade Count: (+10)
  • go hard or go home
Re: Oiling New Bat
« Reply #5 on: June 03, 2020, 08:24:20 PM »
I also never understand why people knock it in and then put the scuff on?

I would think you want the scuff on whist the face is flat and untouched so the scuff sticks to a flatter surface area
Logged
I don't know how to put this, but, I'm kind of a big deal.

InternalTraining

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 4819
  • Trade Count: (0)
Re: Oiling New Bat
« Reply #6 on: June 03, 2020, 08:26:53 PM »
Just a little bit on new bats to prepare the surface for knocking and also seal moisture in.

I do apply oil to older bats, all over, to maintain moisture. My old bats look like "chips" as Julian Millichamp would say. ;)
Logged

SOULMAN1012

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 6836
  • Trade Count: (+27)
Re: Oiling New Bat
« Reply #7 on: June 03, 2020, 09:56:31 PM »
Never used oil as in linseed oil from a bottle, always use bat wax and normally apply a single light coat to a new bat and then at the start of each season remove the scuff sheet, sand lightly and apply bat wax sand then add a scuff.

Also most of the bats I get have a scuff on already but if not I apply a scuff before “knocking in” prep work which nearly always is done on the Bola machine.
Logged

WalkingWicket37

  • International Superstar
  • *******
  • Offline Offline
  • Posts: 12983
  • Trade Count: (+26)
Re: Oiling New Bat
« Reply #8 on: June 03, 2020, 09:59:16 PM »
Quote from: Canners on June 03, 2020, 08:24:20 PM
I also never understand why people knock it in and then put the scuff on?

I would think you want the scuff on whist the face is flat and untouched so the scuff sticks to a flatter surface area

Because if you put the scuff sheet on before knocking the bat I'm you end up with air bubbles when you round the edge.

Also a properly knocked in bat will be evenly compressed over the surface will be flat and the scuff sheet will stick fine
Logged

Canners

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 5085
  • Trade Count: (+10)
  • go hard or go home
Re: Oiling New Bat
« Reply #9 on: June 03, 2020, 10:44:31 PM »
Quote from: WalkingWicket37 on June 03, 2020, 09:59:16 PM
Because if you put the scuff sheet on before knocking the bat I'm you end up with air bubbles when you round the edge.

Also a properly knocked in bat will be evenly compressed over the surface will be flat and the scuff sheet will stick fine

Never ended up with any air bubbles on any of my bats that have had the faces applied straight away.

I also think knocking in only needs to be minimal on a properly pressed bat.

I knock the toe in for a bit and give it a bit of a whack more to test the ping and then go and use it
Logged
I don't know how to put this, but, I'm kind of a big deal.

brokenbat

  • International Captain
  • ****
  • Offline Offline
  • Posts: 2327
  • Trade Count: (0)
Re: Oiling New Bat
« Reply #10 on: June 04, 2020, 12:20:00 AM »
I absolutely HATE pale white bats (it’s become a fashion these days) and love the nice light golden tinge an oiled bat has. Most new bats don’t need much oil these days, and over oiling can ruin a bat...so just about a teaspoon should be enough. Sometimes I use much less (just soak my fingers and rub them over), just to get that nice colour.
Logged
 

Advertise on CBF