What difference does 18 grains on the front of the bat make to the performance of the bat? Excuse my thickness but I thought it was about 2mm of laminated face? And what weight is the bat Vic to get 35mm edges? Looking forward to these pics.
Glad the bat arrived safely vic. Bit longer than we thought but only a couple of weeks in the end. 18 grains on the front bit does not make any difference. It the back bit and the method of gluing that is key in the performance. Use both and then see what you think. Both will be superb I'm sure but the one you got from me was also £110 cheaper.
Vic - seriously stop with the talking and get your camera out!!!!!!!!!!!!!!
I'm quite sure Tim Keeley presses differently for each manufacturers, you can notice this if you buy Newbery bats and other bats from this forum who get there bats made from Tim Keeley and you will see both are pressed differently, hence, one has better ping than other. I have three Tim Keeley bats where one is Newbery and other two are different manufacturer.
I am quite sure this isn't the case, it is luck of the draw. The bats may be finished differently though...
Is it possible that both bats aren't from the same place?
I used to request a flat press roller on all Mongoose TK's. Whereas Newbery his other brands generally use a domed.