Custom Bats Cricket Forum
Equipment => Bats => Bat Making => Topic started by: j.f.101 on April 13, 2011, 12:16:24 PM
-
Right, been searching around a bit for some fairly basic tools and these are what seemed reasonably priced and not too shabby quality. Most are on amazon as i've got free next day delivery and they've always been reliable for me in the past
Rasps http://www.amazon.co.uk/Silverline-MS104-3-piece-Rasp-Set/dp/B000LFTQVI/ref=sr_1_1?ie=UTF8&qid=1302695585&sr=8-1
Flat plane http://www.amazon.co.uk/Draper-19702-2-Piece-Combined-Plane/dp/B0001K9QQ8/ref=sr_1_1?ie=UTF8&s=diy&qid=1302695558&sr=1-1
Travishers http://www.gandmtools.co.uk/cat_leaf.php?id=1255
Drawknife http://www.amazon.co.uk/Flexcut-KN16-5-Draw-Knife/dp/B000ZRV5MK/ref=sr_1_1?ie=UTF8&qid=1302695433&sr=8-1
Flat spokeshave http://www.amazon.co.uk/Faithfull-FAISSFLAT-SSFLAT-Spokeshave-Flat/dp/B000C750E2/ref=sr_1_1?ie=UTF8&qid=1302696744&sr=8-1 round one also available
Clamp grips http://www.amazon.co.uk/Silverline-273221-Soft-Vice-Jaws/dp/B000LFTOL0/ref=pd_sim_diy_1
Clamp I can borrow from my school and can use a massive benc there too so they're not really needed.
Overall comes to about £110 + p&p
Ive never really done anything like this in the past so have no idea about if these are good quality or not so any thoughts from anyone who knows would be really hepful, please. :D
Cheers,
James
-
thats the wrong sort of drawknife needs to be bigger there are loads on ebay and with spokeshaves look on ebay i find wooden ones are best
-
Ahh yes didn't see the length of it :D
this ones a 9incher http://cgi.ebay.co.uk/Straight-bladed-9-drawknife-Brades-VGC-/260766557982?pt=UK_Collectable_ToolsHasdware_RL&hash=item3cb6e5e71e
but theres looks like a better quality 8 incher too http://cgi.ebay.co.uk/Mike-Abbott-pattern-drawknife-made-Ray-Iles-/180428773222?pt=UK_Collectable_ToolsHasdware_RL&hash=item2a02649766
And a spoke shave... http://cgi.ebay.co.uk/Large-boxwood-spokeshave-brass-mouth-VGC-/260766561607?pt=UK_Collectable_ToolsHasdware_RL&hash=item3cb6e5f547
although there are a few going on here or £15 for 3 which needed sharpening and rust removing
-
heres a cheap Spokeshave
http://cgi.ebay.co.uk/Vintage-Old-Tool-Early-12-Inch-Spokeshave-/180651615298?pt=UK_Collectable_ToolsHasdware_RL&hash=item2a0face442#ht_500wt_1156
drawkniofes look decent but most need a load of sharpening probs by a blacksmith if you can find one
-
Cheers mate
Managed to find someone not too far away from me. may sound like a stupid question but would even new tools need sharpening?
-
well they are made and left in boxes for god knows how long so they will need sharpening maybe a little maybe a lot best bet is to go to someone who can sharpen it and just ask
-
OK cheers. I reckon I'll buy some of these tools now - maybe plane travisher spokeshave drawknife - then add the rest over time.
-
Forget about rasps you won't need them as your shoulders will be as good as shaped for you to finish them use a spokeshave and or a drawknife
Ok best go for a 12" Drawknife older ones have better steel in them stay shaperer for long as well
Spokeshave go for an old cast iron one stanley, record
Also look for an old wooden plane [a bit lighter to use, so make sure it's isnt a heavy wood]
Smoothing plane and if you must a block plane.
Travishers - look for a convex spokeshave or a snell leather thingy people talk about. those Gandmtools ones take a lot of setup and sharpening...
You need something to sharpen your tools with as well
-
maybe a better drawknife then http://cgi.ebay.co.uk/Vintage-11-Drawknife-Photo-/150531709006?pt=UK_Hand_Tools_Equipment&hash=item230c63984e
Spokeshave go for an old cast iron one stanley, record
Dyou mean one with a past record? most of the ones there seem either quite old or very new.
How old do you mean? this seems like an old plane (if we can believe the seller!) http://cgi.ebay.co.uk/VINTAGE-WOODEN-PLANE-100-YEARS-OLD-MARSHALL-GLASGOW-/180648709578?pt=UK_Collectable_ToolsHasdware_RL&hash=item2a0f808dca
-
those Gandmtools ones take a lot of setup and sharpening...
So true, you've given me a project idea!
That's a nice plane but too big. You need a plane that's 9 inches or less really in my opinion, so long as the sole and the blade are in good condition.
-
Slightly smaller plane is proving hard to find - most are bigger or give no size. hmmmm just keep looking.
If anyone's selling one of the things that's mentioned on the thread btw then just post it up if that's ok ;)
-
Slightly smaller plane is proving hard to find - most are bigger or give no size. hmmmm just keep looking.
If anyone's selling one of the things that's mentioned on the thread btw then just post it up if that's ok ;)
Look for a smoothing plane!