Topic: Stickers not sticking to the bat? (Read 2715 times)

AussieCricketFan · « **on:** January 02, 2015, 02:19:12 PM »

I've got a bat which I've oiled on both the face and spine sides of the bat. I want to stick a sticker on the spine but it won't stick. I presume it's because of the oil because extratec has the same problem sometimes. Any suggestions on how I can stick the sticker on without it coming off?

Thanks for any suggestions!

Neon Cricket · « **Reply #1 on:** January 02, 2015, 02:26:18 PM »

Wait until the oil is dried fully - normally that'll be your issue.

Where did you get the stickers from out of interest? If they're not good quality then that can also cause issues once the bat has been oiled!

Seniorplayer · « **Reply #2 on:** January 02, 2015, 03:47:08 PM »

As above if the oil as not fully dried stickers tend to react
UHU all purpose glue is what I use.

Gingerbusiness · « **Reply #3 on:** January 02, 2015, 03:51:58 PM »

I give it about 2 weeks of drying, as well as a full knocking in, before putting stickers on.

Otherwise, they will slide right off. Also, I use 3M spray adhesive. much more effective than PVA.

Author Topic: Stickers not sticking to the bat? (Read 2715 times)

AussieCricketFan

Stickers not sticking to the bat?

Neon Cricket

Re: Stickers not sticking to the bat?

Seniorplayer

Re: Stickers not sticking to the bat?

Gingerbusiness

Re: Stickers not sticking to the bat?