Looks impressive!
Do you mind telling us the steps etc in refurbing (what did you do first, second etc)
Thanks!
Yeah no problem...
1st removed the hammer edge and stickers
Remove all the glue with a stanley knife blade (keeping it at a 90 degree angle) so not to damage, cut the wood
start the sanding process with around an 120 grit paper (with power sander).
once a rough sand is complete, remove all the dust with a little water on some kitchen role
Leaved to dry
Same process again using 120 grit but this time working up to a very fine (think it was a 200 grit ill have to check) then I used some wax to give it a good buff and to replace some of the moisture taken out from the sanding
Repeat until happy with the finish...i them left it for a few days before applying the stickers.
Tools you will need are...power sander, sand paper, drill, buffing bit for drill, wax oh and a stanley knife blade
Author
Topic: Blueroom Refurb... (Read 3475 times)