I bought a part made off Peplow a while back, and then acquired a few tools, but in the midst of (quite literally) waiting for paint dry, I thought I'd pop out into the garden and try and fashion it into something more bat like.
Starting issue was no workbench and vice, but the patio table, a g-clamp and a 12mm pine and I was able to fashion something to hold the bat comfortably in place.
The tools I had to start with are a drawknife, spokeshave, belt and orbital sanders, sanding block and sand paper, and a couple of flat planes... as shown below. And yes, the spokeshave did split in two as I was attempting to separate the body to sharpen it. Also critical was the diamond sharpening block that was well used...
Anyway, what I created weighs in at 2lb13 and I would really like to get my hands on a round bottomed plane just to take a little out of the toe and shoulders, and maybe do a spot of concaving on the back. Here's a few pictures so you can see what my three hours work created...
Complete with obligatory biscuits and celebratory beer...