Print

[kouservice]

Two bats got injured during our club practice session

Any advice on whether to give an attempt to repair it or leave it as Unrepairable ?


1 Bat ( A KG 4 years Old)








2 Bat ( 1 year old BDM)

[Torque]

The KG will need a new handle, and the BDM is still salvageable if you can open the cracks up and get some glue in there.

[kouservice]

The KG will need a new handle, and the BDM is still salvageable if you can open the cracks up and get some glue in there.

 KG - I think than I have to leave it as  I will not be able to rehandle it.
 BDM - The crack has gone the full way through the back ? Is it worth to repair

[Torque]

I'd give it a go, you've got nothing to lose. I reckon some dowels will help; your best bet would be too ask one of the bat makers on the forum.

You can always cut the bat down into a fielding bat if the repair doesn't go to plan.

[kouservice]

Thanks  Torque

 Will wait for a few more response and than decide on their fate.

[Torque]

Thanks  Torque

 Will wait for a few more response and than decide on their fate.

No problem.

Keep us updated with what you decide to do, best of luck.

[imogzyboy]

They are repairable in my opinion but it depends if you feel they are good enough Bats to spend the money on?

[Dhiraj]

I think BDM is salvageable.Give it a shot KT!!!

[Chad]

I've seen many worse than the BDM being salvaged, just some glue and clamp should do the trick!

[dancardiff]

BDM can be salvaged I reckon guy at our club had similar problem with his GM

[kouservice]

Thanks,

   dancardiff,Chad,Torque,Dhiraj

    I will have a go at the Salvagable BDM.

[vasiraju]

I think KG is gone. May be it is worth trying out fixing BDM. Looking at the pics, BDM has its edge broken to a deeper level. So, better handle it with care and use them for training sessions first. If you could get the impact u prefer, then try it on a match. Also, while gluing, be sure to strap it hard and possibly add 4 to 4 counts of string roll.

[LEACHY48]

Both can be repaired, the KG needs re handling, and the BDM just needs a bucket load of glue lol I have just done 2 repairs similar to the BDM, I will stick some pictures up