Suggest me a profile and maker please?
Advertise on CBF
Pages: [1] 2 3

Author Topic: Suggest me a profile and maker please?  (Read 6379 times)

0 Members and 4 Guests are viewing this topic.

scotsco

  • Village Cricketer
  • *
  • Offline Offline
  • Posts: 13
  • Trade Count: (0)
Suggest me a profile and maker please?
« on: August 03, 2015, 09:11:06 PM »
Ok firstly I've been on and off this forum for 4 years and have never posted as I've not had much need too... But I've come across a dilemma, I've been using hawk cricket for 8 years now and have nothing but good experiences from their bats and service! However I'm now at a stage in my life where I can't justify hawk prices! Girlfriend, kid on the way.... etc.

Ok now a bit about me as a player! I'm shortish 5ft7 and open the batting I'm a very patient player who will happily block out when needs too! And like a bat around 2.8, my main scoring shots are cover drives and off drives.... so I'd like to think my batting usually is very text book! However my main sport is hockey (I know should be cricket... but yeah sorry lads), so if I need too score very quickly the slog sweep and agricultural swings come out!

So my real question is can someone suggest a profile? (I tend too hit low on the bat.... hockey influenced;)

And can you offer a bat maker in/ near the midlands? Or Staffordshire/ Worcestershire? As I like to see the kit I'm buying before handing over my money.
Logged

scotsco

  • Village Cricketer
  • *
  • Offline Offline
  • Posts: 13
  • Trade Count: (0)
Re: Suggest me a profile and maker please?
« Reply #1 on: August 03, 2015, 09:13:32 PM »
Looking too spend around £150-200...

Thanks to anyone who replies in advance ;)
Logged

WalkingWicket37

  • International Superstar
  • *******
  • Offline Offline
  • Posts: 12983
  • Trade Count: (+26)
Re: Suggest me a profile and maker please?
« Reply #2 on: August 03, 2015, 09:27:45 PM »
I'd be tempted to go to a forum sponsor and ask what they think.

@Red Ink Cricket are excellent to deal with and I'm yet to see a bad word about their bats.
Logged

uknsaunders

Re: Suggest me a profile and maker please?
« Reply #3 on: August 03, 2015, 09:43:45 PM »
Go for a high middle if you are short, amplus profile maybe? Short people from what's been said on this forum and my personal experience tend to hit it higher up the blade. Also suggest getting a harrow length/ full width blade and possibly a SSH.

Sent from my Nexus 5 using Tapatalk
Logged
email and googletalk: uknsaunders@gmail.com
club website: http://www.farmerscricketjersey.net/

scotsco

  • Village Cricketer
  • *
  • Offline Offline
  • Posts: 13
  • Trade Count: (0)
Re: Suggest me a profile and maker please?
« Reply #4 on: August 03, 2015, 09:54:03 PM »
I understand the theory on the higher middle with me being not particularly tall.... however if I do go for a swing I tend too find myself hitting the ball very low down, as my natural instinct is more in line with hockey, hitting the ball on the end of the stick! So yes, when I play more cultured I do find the higher middle helpful! But when needs must as I hit low down when putting my arms through the damn thing... I find I lack oomph as I fail to find the middle! Ideally (I know this probably doesn't exist! But I need a profile which will have a long middle, which start low! Yet still be able to provide a decent amount of punch further up! .....the only bays I've came across which are able to provide this either pick up poor or are very heavy! That's while I'm calling on all off your expert knoledge bases! ;) nothing like flattery! ;)
Logged

Buzz

  • Administrator
  • International Superstar
  • *****
  • Offline Offline
  • Posts: 12679
  • Trade Count: (+13)
  • Clear your mind, stay still and watch the ball
Re: Suggest me a profile and maker please?
« Reply #5 on: August 03, 2015, 09:54:11 PM »
Check where you hit the ball on your current bat, but something with a tendulkar profile although a lot lighter may work for you.
Logged
"Bradman didn't used to have any trigger movements or anything like that. He turned batting into a subconscious act" Tony Shillinglaw.

scotsco

  • Village Cricketer
  • *
  • Offline Offline
  • Posts: 13
  • Trade Count: (0)
Re: Suggest me a profile and maker please?
« Reply #6 on: August 03, 2015, 09:56:09 PM »
Sorry for the excessive use of exclamation marks! Didn't mean for it too come across shout and as if I'm ungrateful for your answers. Both your points are very valid and justified.

Thank you both very much
Logged

scotsco

  • Village Cricketer
  • *
  • Offline Offline
  • Posts: 13
  • Trade Count: (0)
Re: Suggest me a profile and maker please?
« Reply #7 on: August 03, 2015, 09:57:17 PM »
And I know I hit it mid too low... other than when defending which hits high due to my lack of height
Logged

uknsaunders

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 8656
  • Trade Count: (+4)
    • Farmers CC
Re: Suggest me a profile and maker please?
« Reply #8 on: August 03, 2015, 10:02:02 PM »
High middle bats tend to respond pretty well low down as well, I think their is some science behind it but an extended middle like a scat profile might be an alternative.

Sent from my Nexus 5 using Tapatalk

Logged
email and googletalk: uknsaunders@gmail.com
club website: http://www.farmerscricketjersey.net/

thedon

  • County 1st XI
  • ***
  • Offline Offline
  • Posts: 922
  • Trade Count: (0)
Re: Suggest me a profile and maker please?
« Reply #9 on: August 03, 2015, 10:04:49 PM »
Was at choice cricket today. They had some lovely tendulkar profile bats at 2lb 8oz for £180
Logged

InternalTraining

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 4792
  • Trade Count: (0)
Re: Suggest me a profile and maker please?
« Reply #10 on: August 03, 2015, 11:49:20 PM »
Quote from: uknsaunders on August 03, 2015, 09:43:45 PM
Go for a high middle if you are short, amplus profile maybe? Short people from what's been said on this forum and my personal experience tend to hit it higher up the blade. Also suggest getting a harrow length/ full width blade and possibly a SSH.

Sent from my Nexus 5 using Tapatalk

Agreed.

Look for a "Harrow" Amplus from Millichamp and Hall, they are reasonably priced and a lot of bat for money.
Logged

suraj1108

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 181
  • Trade Count: (0)
Re: Suggest me a profile and maker please?
« Reply #11 on: August 04, 2015, 02:56:42 AM »
you could have a word with the forum sponsors; they are the best to guide you through..
paul isn't too far in derby you could take your bat to him & seek his guidance...believe his spectre b1 in harrow might do wonders for you :)
Logged
i thank god for cricket, beer & women

scotsco

  • Village Cricketer
  • *
  • Offline Offline
  • Posts: 13
  • Trade Count: (0)
Re: Suggest me a profile and maker please?
« Reply #12 on: August 04, 2015, 04:25:25 AM »
Cheers for the input guys! Never felt the need for a SSH or harrow but maybe worth going to a shop and picking a couple up! And forgive my ignorance but Paul?  What company is his?
Logged

suraj1108

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 181
  • Trade Count: (0)
Re: Suggest me a profile and maker please?
« Reply #13 on: August 04, 2015, 04:49:07 AM »
Quote from: scotsco on August 04, 2015, 04:25:25 AM
Cheers for the input guys! Never felt the need for a SSH or harrow but maybe worth going to a shop and picking a couple up! And forgive my ignorance but Paul?  What company is his?

paul aldred; send him an email aldred173@btinternet.com. he'll sort you out.
Logged
i thank god for cricket, beer & women

Topgun

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 226
  • Trade Count: (0)
Re: Suggest me a profile and maker please?
« Reply #14 on: August 04, 2015, 06:14:24 AM »
Doesnt Ryan make pretty good bats for around that price point he's after?
Logged
Pages: [1] 2 3
« previous next »
 

Advertise on CBF