Suggestions on the best solution to repair this.
Advertise on CBF
Pages: [1] 2

Author Topic: Suggestions on the best solution to repair this.  (Read 2945 times)

0 Members and 3 Guests are viewing this topic.

0905119

  • Club Cricketer
  • **
  • Offline Offline
  • Posts: 63
  • Trade Count: (0)
  • 'I do love cricket - it's so very English'.
Suggestions on the best solution to repair this.
« on: March 28, 2013, 03:47:41 PM »
Its a cracking stick (no pun intended), and I know its entirely salvageable. Any suggestions on the best way to proceed with repairing this?



Logged

Chad

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 3007
  • Trade Count: (+22)
Re: Suggestions on the best solution to repair this.
« Reply #1 on: March 28, 2013, 03:49:49 PM »
Not 100% sure if it is salvageable, but... I would open up the crack, get some glue in it, clamp it down, then put a wide fibreglass tape around that region. :)
Logged

0905119

  • Club Cricketer
  • **
  • Offline Offline
  • Posts: 63
  • Trade Count: (0)
  • 'I do love cricket - it's so very English'.
Re: Suggestions on the best solution to repair this.
« Reply #2 on: March 28, 2013, 03:51:30 PM »
You reckon its a goner? Dont have a clamp -- could cut up strips of bat grip and use that?
Logged

ajmw89

  • International Captain
  • ****
  • Offline Offline
  • Posts: 2036
  • Trade Count: (+5)
  • 4XI ornament
    • Wright Cricket
Re: Suggestions on the best solution to repair this.
« Reply #3 on: March 28, 2013, 03:52:02 PM »
Get as much glue in the crack as possible and wrap tightly in parcel tape or masking tape.  either that or use bits of cut up grip to clamp it.
Logged

0905119

  • Club Cricketer
  • **
  • Offline Offline
  • Posts: 63
  • Trade Count: (0)
  • 'I do love cricket - it's so very English'.
Re: Suggestions on the best solution to repair this.
« Reply #4 on: March 28, 2013, 03:56:32 PM »
Quote from: ajmw89 on March 28, 2013, 03:52:02 PM
Get as much glue in the crack as possible and wrap tightly in parcel tape or masking tape.  either that or use bits of cut up grip to clamp it.

My thoughts exactly.
Logged

Ryan

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 4555
  • Trade Count: (+17)
Re: Suggestions on the best solution to repair this.
« Reply #5 on: March 28, 2013, 03:59:57 PM »
Personally i think it needs a clamp for the pressure. Also water some PVA glue down a little, that should guarantee it gets down to the bottom of the crack.
Logged

0905119

  • Club Cricketer
  • **
  • Offline Offline
  • Posts: 63
  • Trade Count: (0)
  • 'I do love cricket - it's so very English'.
Re: Suggestions on the best solution to repair this.
« Reply #6 on: March 28, 2013, 04:03:30 PM »
Quote from: Ryan on March 28, 2013, 03:59:57 PM
Personally i think it needs a clamp for the pressure. Also water some PVA glue down a little, that should guarantee it gets down to the bottom of the crack.

Thanks Ryan. I was wondering whether watering down some pva would do the trip although I did also question whether that would compromise its adhesive strength..?
Logged

ajmw89

  • International Captain
  • ****
  • Offline Offline
  • Posts: 2036
  • Trade Count: (+5)
  • 4XI ornament
    • Wright Cricket
Re: Suggestions on the best solution to repair this.
« Reply #7 on: March 28, 2013, 04:08:30 PM »
If you can get some clamps with the plastic heads that have a bit of movement in them, they might do the job.  A bit of masking tape around the areas where tha clamp faces are in contact with the bat wont's go a miss.  Stop you denting the wood to badly then.
Logged

0905119

  • Club Cricketer
  • **
  • Offline Offline
  • Posts: 63
  • Trade Count: (0)
  • 'I do love cricket - it's so very English'.
Re: Suggestions on the best solution to repair this.
« Reply #8 on: March 28, 2013, 04:14:00 PM »
Quote from: ajmw89 on March 28, 2013, 04:08:30 PM
If you can get some clamps with the plastic heads that have a bit of movement in them, they might do the job.  A bit of masking tape around the areas where tha clamp faces are in contact with the bat wont's go a miss.  Stop you denting the wood to badly then.

All set I can get a clamp at £land.. Thanks people!
Logged

Banksy

  • Club Cricketer
  • **
  • Offline Offline
  • Posts: 136
  • Trade Count: (0)
Re: Suggestions on the best solution to repair this.
« Reply #9 on: April 03, 2013, 06:00:35 PM »
Looks like when they've hammered the handle in they've gone a little too far and the handle has caught under the willow abit. Just whip the top couple of mm off the broken bit before you glue it back down and it should help prevent it happening again.

Failing that, a little brass screw will work  ;)
Logged

0905119

  • Club Cricketer
  • **
  • Offline Offline
  • Posts: 63
  • Trade Count: (0)
  • 'I do love cricket - it's so very English'.
Re: Suggestions on the best solution to repair this.
« Reply #10 on: April 04, 2013, 01:15:29 PM »
Quote from: Banksy on April 03, 2013, 06:00:35 PM
Looks like when they've hammered the handle in they've gone a little too far and the handle has caught under the willow abit. Just whip the top couple of mm off the broken bit before you glue it back down and it should help prevent it happening again.

Failing that, a little brass screw will work  ;)

Thanks mate:)
Logged

RossViper

  • County 1st XI
  • ***
  • Offline Offline
  • Posts: 741
  • Trade Count: (0)
  • What noise does a cow make?
    • My Excel Blog!
Re: Suggestions on the best solution to repair this.
« Reply #11 on: April 06, 2013, 01:03:41 PM »
Quote from: Banksy on April 03, 2013, 06:00:35 PM
Looks like when they've hammered the handle in they've gone a little too far and the handle has caught under the willow abit. Just whip the top couple of mm off the broken bit before you glue it back down and it should help prevent it happening again.

Failing that, a little brass screw will work  ;)

WTF?????



I think you'll find it hard to fix this....

Logged
"I can bowl all the variations, none of them spin"
Me, at nets Thursday 12 June 2014

0905119

  • Club Cricketer
  • **
  • Offline Offline
  • Posts: 63
  • Trade Count: (0)
  • 'I do love cricket - it's so very English'.
Re: Suggestions on the best solution to repair this.
« Reply #12 on: April 12, 2013, 11:49:54 AM »
Quote from: RossViper on April 06, 2013, 01:03:41 PM
WTF?????



I think you'll find it hard to fix this....

Fixed. Netted. Great. Brass screws work a treat. Thanks:)
Logged

uknsaunders

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 8656
  • Trade Count: (+4)
    • Farmers CC
Re: Suggestions on the best solution to repair this.
« Reply #13 on: April 12, 2013, 04:28:22 PM »
Pics?
Logged
email and googletalk: uknsaunders@gmail.com
club website: http://www.farmerscricketjersey.net/

Sam

  • International Captain
  • ****
  • Offline Offline
  • Posts: 1582
  • Trade Count: (+1)
Re: Suggestions on the best solution to repair this.
« Reply #14 on: April 12, 2013, 04:34:52 PM »
You stuck a screw through the back of your bat  :o?
Logged
Pages: [1] 2
« previous next »
 

Advertise on CBF