Sanga's Duck Bill shape
Advertise on CBF

Pages: [1] 2

Author Topic: Sanga's Duck Bill shape  (Read 12591 times)

0 Members and 1 Guest are viewing this topic.

FattusCattus

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 9708
  • Trade Count: (+30)
  • Bend it like Fattus!!
Sanga's Duck Bill shape
« on: June 25, 2014, 09:24:50 AM »

I'm sure this has been covered elsewhere - but I really like the 'duckbill' shape SS that Sanga has been using - these are usually the ones with minimal to zero concaving right? Is this what you guys call the Michael Clarke shape, or have I got muddled up?

Have any of you guys got one in this shape, and have you used it? If so, how is it going, do they pick up nicely?

Also, is this shape and the zero concaving limited to the higher end models, or are there some of the more reasonably costed models available in this shape?
Logged
If you tolerate this, then your baked goods will be next.

Chad

  • World Cup Winner
  • *****
  • Online Online
  • Posts: 3010
  • Trade Count: (+22)
Re: Sanga's Duck Bill shape
« Reply #1 on: June 25, 2014, 10:25:16 AM »

Hi Fattus, I've used mine it two matches, and it goes very well! The pick up on them is superb, cannot complain about it at all! The one I got is from OLS, and is this one:

http://custombats.co.uk/cbforum/index.php?topic=28959.0

Here's the link to buy:

http://onlinestockist.com/SS-Limited-Edition-English-Willow-Cricket-Bat-2014-Full-Back-Profile-P4035530.aspx


There are others like it as well:

http://onlinestockist.com/SS-PLATINUM-Plus-Players-Proflie-English-Willow-Cricket-Bat-2014-P4030751.aspx

And a slightly cheaper version:

http://onlinestockist.com/SS-I-Bat-English-Willow-Cricket-Bat-Michael-Clarke-Shape-P3472256.aspx

Hope this helps!
Logged

uknsaunders

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 8656
  • Trade Count: (+4)
    • Farmers CC
Re: Sanga's Duck Bill shape
« Reply #2 on: June 25, 2014, 11:05:31 AM »

Why not go to County, they pretty much started it:-



Logged
email and googletalk: uknsaunders@gmail.com
club website: http://www.farmerscricketjersey.net/

Fearless Fly

  • County 2nd XI
  • ***
  • Offline Offline
  • Posts: 389
  • Trade Count: (0)
Re: Sanga's Duck Bill shape
« Reply #3 on: June 25, 2014, 11:08:26 AM »

How old is that county, we dont see any of them in AUS any more
shame really as they look like quality blades
Logged

Pitbull

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 268
  • Trade Count: (+2)
Re: Sanga's Duck Bill shape
« Reply #4 on: June 25, 2014, 11:15:46 AM »

Is that county a custom shape or is it just an old one with new stickers on? Used to love my old county bats
Logged

uknsaunders

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 8656
  • Trade Count: (+4)
    • Farmers CC
Re: Sanga's Duck Bill shape
« Reply #5 on: June 25, 2014, 11:29:05 AM »

It's an Insignia with new stickers applied when it was refurbed. I no longer have it (too heavy) but it went very well.
Logged
email and googletalk: uknsaunders@gmail.com
club website: http://www.farmerscricketjersey.net/

AverageCricketer

  • Colts
  • County 2nd XI
  • ***
  • Offline Offline
  • Posts: 438
  • Trade Count: (0)
Re: Sanga's Duck Bill shape
« Reply #6 on: June 25, 2014, 11:45:39 AM »

County is in aus. It is owned by GN, but retailers don't seem to stick them much. The clipper looks like a bargain! http://www.gnsports.com.au/products/au/gray-nicolls/bats/county-bats
Logged

Focus Cricket

  • Village Cricketer
  • *
  • Offline Offline
  • Posts: 24
  • Trade Count: (0)
Re: Sanga's Duck Bill shape
« Reply #7 on: June 25, 2014, 11:59:24 AM »

Here you go guys (see pictures attached) - these bats pick up beautifully, mid middle with spine running up the bat to elongate the middle and give the bat excellent balance. This bat pictured weighs 2.9 with 40mm edges and picks up like a 2.8.  We call it the MC profile




Good Luck
« Last Edit: June 25, 2014, 12:01:03 PM by Focus Cricket »
Logged

i12breakfree

  • International Captain
  • ****
  • Offline Offline
  • Posts: 2291
  • Trade Count: (+3)
Re: Sanga's Duck Bill shape
« Reply #8 on: June 25, 2014, 12:08:18 PM »

BAS also has a similar shape. Got this pic from my BAS supplier

Logged

Pitbull

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 268
  • Trade Count: (+2)
Re: Sanga's Duck Bill shape
« Reply #9 on: June 25, 2014, 12:52:24 PM »

It's an Insignia with new stickers applied when it was refurbed. I no longer have it (too heavy) but it went very well.
I had the insignia as a junior bat, the old stickers were so nice too. I'm sure County could knock one up easily enough
Logged

jwebber86

  • International Captain
  • ****
  • Offline Offline
  • Posts: 1765
  • Trade Count: (+12)
Re: Sanga's Duck Bill shape
« Reply #10 on: June 25, 2014, 01:03:25 PM »

County is in aus. It is owned by GN, but retailers don't seem to stick them much. The clipper looks like a bargain! http://www.gnsports.com.au/products/au/gray-nicolls/bats/county-bats


i surprised how different the stickers are compared to the uk. much more minimalist
Logged
@james_webber
@dunstercricket
gone from being the opening batsmen to being the opening bowler after the first 6 league games

Mortimer

  • County 2nd XI
  • ***
  • Offline Offline
  • Posts: 400
  • Trade Count: (0)
Re: Sanga's Duck Bill shape
« Reply #11 on: June 25, 2014, 01:14:48 PM »

i surprised how different the stickers are compared to the uk. much more minimalist

That's because they are now totally different companies. County in Australia is now part of GN. The English company is actually Hunts County Bats and not owned by any other bat manufacturer.
Logged

Vitas Cricket

  • Forum Sponsor
  • Forum Legend
  • *****
  • Offline Offline
  • Posts: 6625
  • Trade Count: (+20)
  • Cricket Retailer & Coaching Centre in Peterborough
    • Vitas Cricket
Re: Sanga's Duck Bill shape
« Reply #12 on: June 25, 2014, 01:18:23 PM »

County UK and County Aus are different companies.

I can arrange a custom made to any shape from County for £165 in G1 willow, i'll even select the piece of wood myself if you like, i'm there at least once a week between Feb and September, less so through the Winter but they are only down the road, not far for me to go by request. The duck bill toe/Insignia shape is something we/they get a lot of requests for.

Brucie, the bat we did for you isn't too far away from that shape is it? Admittedly not as girthy as some of these Indian made examples, but I'm sure we are all well aware of the reasoning behind bigger/lighter bats coming out of the subcontinent.

jwebber86

  • International Captain
  • ****
  • Offline Offline
  • Posts: 1765
  • Trade Count: (+12)
Re: Sanga's Duck Bill shape
« Reply #13 on: June 25, 2014, 02:00:26 PM »

That's because they are now totally different companies. County in Australia is now part of GN. The English company is actually Hunts County Bats and not owned by any other bat manufacturer.

that would certainly explain that. thanks
Logged
@james_webber
@dunstercricket
gone from being the opening batsmen to being the opening bowler after the first 6 league games

CrickFreak

  • County 2nd XI
  • ***
  • Offline Offline
  • Posts: 457
  • Trade Count: (0)
Re: Sanga's Duck Bill shape
« Reply #14 on: June 25, 2014, 02:01:10 PM »

I'm sure this has been covered elsewhere - but I really like the 'duckbill' shape SS that Sanga has been using - these are usually the ones with minimal to zero concaving right? Is this what you guys call the Michael Clarke shape, or have I got muddled up?

Have any of you guys got one in this shape, and have you used it? If so, how is it going, do they pick up nicely?

Also, is this shape and the zero concaving limited to the higher end models, or are there some of the more reasonably costed models available in this shape?


Checkout this thread - http://custombats.co.uk/cbforum/index.php?topic=30603.0

There is a profile pic of Clarke's bat.
Logged
Pages: [1] 2
 

Advertise on CBF