Let's cut to the Chase... :-)
Advertise on CBF
Pages: [1] 2

Author Topic: Let's cut to the Chase... :-)  (Read 8463 times)

0 Members and 2 Guests are viewing this topic.

ItsJustCricket

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 3698
  • Trade Count: (+9)
    • Its Just Cricket
Let's cut to the Chase... :-)
« on: September 22, 2014, 09:22:39 PM »
Evening All,

Very pleased to confirm that we will be stocking Chase for the first time as of next month.  Neil and I will be visiting Dummer Down Farm on October 25th to hand-pick our first batch of Chase bats, and much like with H4L, Newbery, Gray-Nicolls et al, we will be taking pre-orders in advance of the visit, so if you want a new Chase bat, and want it hand-picked exactly to your specs, simply pay us an £80 deposit and send through your specs!  :)

We will also be stocking their batting gloves (FLC highly recommended!!) and wicket keeping equipment and, possibly, bags as well, all of which can be pre-ordered...

I will update this thread with prices etc. after I've set them tomorrow.

We hope to hear from you soon and please feel free to chase us about Chase!  :D

Paul
Logged

procricket

  • International Superstar
  • *******
  • Offline Offline
  • Posts: 14521
  • Trade Count: (+33)
Re: Let's cut to the Chase... :-)
« Reply #1 on: September 22, 2014, 09:27:17 PM »
Great kit made by a great man good stuff Paul we done mate

Logged
"Doubt whoever but never doubt yourself"

cricketrob

  • County 2nd XI
  • ***
  • Offline Offline
  • Posts: 317
  • Trade Count: (+2)
Re: Let's cut to the Chase... :-)
« Reply #2 on: September 22, 2014, 09:31:03 PM »
Been to dummer a few times some serious bats down there and the softs are stunning.
Logged

Montys Beard

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 280
  • Trade Count: (0)
Re: Let's cut to the Chase... :-)
« Reply #3 on: September 23, 2014, 02:27:32 AM »
Very good news Paul, not seen a bad Chase bat yet. The 175 I have goes like a train...
Logged
"The aim of English cricket is, in fact, mainly to beat Australia" - Jim Laker
@LiamGarratt

ItsJustCricket

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 3698
  • Trade Count: (+9)
    • Its Just Cricket
Re: Let's cut to the Chase... :-)
« Reply #4 on: September 23, 2014, 07:33:01 AM »
Quote from: Montys Beard on September 23, 2014, 02:27:32 AM
Very good news Paul, not seen a bad Chase bat yet. The 175 I have goes like a train...

I still vividly remember the ping of that from knocking it in two years ago - it was that good!  :) Glad it's still going strong...
Logged

ItsJustCricket

Re: Let's cut to the Chase... :-)
« Reply #5 on: September 23, 2014, 08:29:42 AM »
OK, as promised, here are the bat prices:

EU CUSTOMERS

FLC (SH): £324.99
FLC (Harrow): £154.99
R11 Volante / Lancer / Finback: £234.99
R7 Volante / Lancer / Finback: £169.99
R4 Volante / Lancer / Finback: £129.99

CUSTOMERS OUTSIDE THE EU

FLC (SH): £270.83
FLC (Harrow): £129.16
R11 Volante / Lancer / Finback: £195.83
R7 Volante / Lancer / Finback: £141.66
R4 Volante / Lancer / Finback: £108.33

SUPPORT BRITISH MANUFACTURING - All of these bats are handmade in England!  :)

As a goodwill gesture, we will include free knocking-in for any forum member who pre-orders a Chase bat...

If anyone is interested in pre-ordering any Chase soft gear, please PM me for prices etc.  Ditto for those who want more details on the Chase bats: profile shapes, grades etc.
Logged

TangoWhiskey

  • International Captain
  • ****
  • Offline Offline
  • Posts: 1629
  • Trade Count: (0)
  • Review that.
Re: Let's cut to the Chase... :-)
« Reply #6 on: September 23, 2014, 08:47:28 AM »
Paul, where is the furthest you go to hand pick your bats?
Logged

smokem

  • County 1st XI
  • ***
  • Offline Offline
  • Posts: 973
  • Trade Count: (+1)
Re: Let's cut to the Chase... :-)
« Reply #7 on: September 23, 2014, 09:28:32 AM »
Just went to the Chase website and their gear looks very classy indeed.

Paul, can other options (such as LB) be specified at a fairly specific weight (and not a weight range as shown on their website)?
Logged

RageofKlugman

  • Village Cricketer
  • *
  • Offline Offline
  • Posts: 42
  • Trade Count: (0)
Re: Let's cut to the Chase... :-)
« Reply #8 on: September 23, 2014, 10:33:12 AM »
Excellent news! I've always been interested in Chase bats, so it will be good to see some in the flesh. So to speak.
Logged

ItsJustCricket

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 3698
  • Trade Count: (+9)
    • Its Just Cricket
Re: Let's cut to the Chase... :-)
« Reply #9 on: September 23, 2014, 12:12:25 PM »
Quote from: TangoWhiskey on September 23, 2014, 08:47:28 AM
Paul, where is the furthest you go to hand pick your bats?

So far, I think it's been Taunton (M&H), but will probably be Slazenger soon as their warehouse has moved up to Wigan! They are long days and the transport costs really add up, which is one of the reasons why our bats will never be the cheapest on the market...
Logged

ItsJustCricket

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 3698
  • Trade Count: (+9)
    • Its Just Cricket
Re: Let's cut to the Chase... :-)
« Reply #10 on: September 23, 2014, 12:14:04 PM »
Quote from: smokem on September 23, 2014, 09:28:32 AM
Just went to the Chase website and their gear looks very classy indeed.

Paul, can other options (such as LB) be specified at a fairly specific weight (and not a weight range as shown on their website)?

Vincent, as with H4L, bats can pretty much be made to order with Chase.  Definitely one of the benefits of the bat maker doing it all in-house!  :)
Logged

Chad

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 3007
  • Trade Count: (+22)
Re: Let's cut to the Chase... :-)
« Reply #11 on: September 23, 2014, 12:16:48 PM »
Eurgh, another brand I've wanted to try out... Do you know if they use a CNC, Paul? I may have gotten brands muddled up, but I think I remembered a Chase video on Youtube, which showed them using a CNC. Not that it matters, since B3 and GM have both impressed me with their technology, but it doesn't hurt to know! :)
Logged

tim2000s

  • Administrator
  • International Superstar
  • *****
  • Offline Offline
  • Posts: 10678
  • Trade Count: (+21)
  • If I only could bat....
Re: Let's cut to the Chase... :-)
« Reply #12 on: September 23, 2014, 12:19:01 PM »
Quote from: Chad on September 23, 2014, 12:16:48 PM
Eurgh, another brand I've wanted to try out... Do you know if they use a CNC, Paul? I may have gotten brands muddled up, but I think I remembered a Chase video on Youtube, which showed them using a CNC. Not that it matters, since B3 and GM have both impressed me with their technology, but it doesn't hurt to know! :)
I believe it was a Copy Lathe in a Twittter image. Someone commented on it on here about March time this year.
Logged

ItsJustCricket

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 3698
  • Trade Count: (+9)
    • Its Just Cricket
Re: Let's cut to the Chase... :-)
« Reply #13 on: September 23, 2014, 12:22:52 PM »
Quote from: Chad on September 23, 2014, 12:16:48 PM
Eurgh, another brand I've wanted to try out... Do you know if they use a CNC, Paul? I may have gotten brands muddled up, but I think I remembered a Chase video on Youtube, which showed them using a CNC. Not that it matters, since B3 and GM have both impressed me with their technology, but it doesn't hurt to know! :)

I don't know yet, Chad, as I haven't been to Dummer Down Farm before! I don't want to speculate on something like this until I've seen it with my own eyes...
Logged

Alvaro

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 6322
  • Trade Count: (+3)
Re: Let's cut to the Chase... :-)
« Reply #14 on: September 23, 2014, 12:23:04 PM »
The FLC pads are the best I have seen, in terms of materials and what one can ascertain from looking in a shop, they are serious bits of kit.
Logged
Pages: [1] 2
« previous next »
 

Advertise on CBF