Bat Handle Repair & Splice Crack
Advertise on CBF
Pages: [1] 2

Author Topic: Bat Handle Repair & Splice Crack  (Read 4083 times)

0 Members and 3 Guests are viewing this topic.

InternalTraining

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 4792
  • Trade Count: (0)
Bat Handle Repair & Splice Crack
« on: February 01, 2019, 06:29:24 PM »
I had a bat handle replace and the job is done cleanly. A day later, I noticed that there is a crack (inch long) on both (front and back of the bat) of the splice right where the tip of the new handle meets the bottom of the splice's V ( like so >- ). The handle seems fine and I don't think that the splice will split any further. Anyone has any experience with this kind of a split? Could it get worse? What's the best way to reinforce the willow and prevent further cracking? Thanks.
Logged

Seniorplayer

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 6236
  • Trade Count: (0)
Re: Bat Handle Repair & Splice Crack
« Reply #1 on: February 01, 2019, 06:41:49 PM »
 Can't be sure without seeing the bat  but it's Quite possible  the bat handle is overtight in the vee  if it is usually once there's a split   the more you use the bat the worse it will get.
You  could fibreglass   or Gorrilla tape it tight.
« Last Edit: February 01, 2019, 06:43:52 PM by Seniorplayer »
Logged

Andythomo21

  • International Captain
  • ****
  • Offline Offline
  • Posts: 1016
  • Trade Count: (0)
Re: Bat Handle Repair & Splice Crack
« Reply #2 on: February 01, 2019, 08:21:24 PM »
Yeah,  only thing I’d suggest would be tightly binding around bottom of splice.
Logged

InternalTraining

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 4792
  • Trade Count: (0)
Re: Bat Handle Repair & Splice Crack
« Reply #3 on: February 01, 2019, 09:05:51 PM »
What's the easiest way to post pictures on the forum?
Logged

Jlscarroll17

  • County 1st XI
  • ***
  • Offline Offline
  • Posts: 589
  • Trade Count: (+2)
Re: Bat Handle Repair & Splice Crack
« Reply #4 on: February 01, 2019, 09:06:38 PM »
You could also run some dowels through the handle/splice to give it some extra support as well
Logged
Hundred scores 186*, 124, 113*, 109

KW9221

  • County 1st XI
  • ***
  • Offline Offline
  • Posts: 818
  • Trade Count: (+4)
Re: Bat Handle Repair & Splice Crack
« Reply #5 on: February 01, 2019, 11:27:33 PM »
Quote from: Seniorplayer on February 01, 2019, 06:41:49 PM
Can't be sure without seeing the bat  but it's Quite possible  the bat handle is overtight in the vee  if it is usually once there's a split   the more you use the bat the worse it will get.
You  could fibreglass   or Gorrilla tape it tight.
I second this. Whoever put in the handle, put it too tight.
Logged
Instagram: Cricketer_guru

WalkingWicket37

  • International Superstar
  • *******
  • Offline Offline
  • Posts: 12983
  • Trade Count: (+26)
Re: Bat Handle Repair & Splice Crack
« Reply #6 on: February 01, 2019, 11:33:39 PM »
Quote from: InternalTraining on February 01, 2019, 09:05:51 PM
What's the easiest way to post pictures on the forum?

@InternalTraining photobucket is working again and has the best app for posting photos to a forum that come out a sensible size
« Last Edit: February 08, 2019, 07:02:13 PM by WalkingWicket37 »
Logged

InternalTraining

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 4792
  • Trade Count: (0)
Re: Bat Handle Repair & Splice Crack
« Reply #7 on: February 08, 2019, 06:49:12 PM »
« Last Edit: February 08, 2019, 07:09:47 PM by InternalTraining »
Logged

WalkingWicket37

  • International Superstar
  • *******
  • Offline Offline
  • Posts: 12983
  • Trade Count: (+26)
Re: Bat Handle Repair & Splice Crack
« Reply #8 on: February 08, 2019, 07:20:20 PM »
Logged

InternalTraining

  • World Cup Winner
  • *****
  • Offline Offline
  • Posts: 4792
  • Trade Count: (0)
Re: Bat Handle Repair & Splice Crack
« Reply #9 on: February 08, 2019, 07:35:47 PM »
^ Thanks!
Logged

dt-second-hand-cricket

  • First XI Captain
  • ***
  • Offline Offline
  • Posts: 249
  • Trade Count: (0)
Re: Bat Handle Repair & Splice Crack
« Reply #10 on: February 08, 2019, 09:51:16 PM »
totally looks like the handle is too big for the bottom of the splice, i must admit i've never seen a crack like that before - would be really interested to see what ideas people come up with for a solution!!
Logged

LukeFramBurton

  • Club Cricketer
  • **
  • Offline Offline
  • Posts: 138
  • Trade Count: (0)
Re: Bat Handle Repair & Splice Crack
« Reply #11 on: February 09, 2019, 08:52:13 AM »
Is it possible to take it back to where the new handle was done and ask them to sort it out for you?
Logged

Seniorplayer

  • Forum Legend
  • ******
  • Offline Offline
  • Posts: 6236
  • Trade Count: (0)
Re: Bat Handle Repair & Splice Crack
« Reply #12 on: February 09, 2019, 09:16:59 AM »
I think the handle  as been knocked in as far as it will go ( its not flush with bottom of the vee ) and is to wide for the vee forceing a crack.
Logged

Wickets-then-runs

Re: Bat Handle Repair & Splice Crack
« Reply #13 on: February 09, 2019, 10:46:51 AM »
In engineering, we would drill a hole right at the bottom of the crack. It relieves the stress at that point and prevents it spreading...
Logged

Gurujames

  • International Captain
  • ****
  • Offline Offline
  • Posts: 1663
  • Trade Count: (0)
Re: Bat Handle Repair & Splice Crack
« Reply #14 on: February 09, 2019, 10:53:03 AM »
That is good advice
Logged
Pages: [1] 2
« previous next »
 

Advertise on CBF