@Kulli, any chance you could document your process for other folks to use when they need to refurbish their bats? Finding someone local who does good work and does not charge arm and leg for the work in USA is painful. I have 2 or 3 bats that I would like to clean up and use again. If I had a good step by step guide on how about it it would be great. I have looked at some Youtube videos on removing the labels, but get stuck on options available to clean the glue (turpentine, paint thinner etc) and than the sanding part (which one to use and which order (coarse, fine, superfine), is where I get lost.
Use a heat gun or hairdryer to heat the stickers and scuff before removing. Heat them as you go and remove them across the grain to avoid pulling bits of the face up with them. Glue any major cracks and tape/clamp overnight.
To get rid of any residue left I find white spirit is good, just apply a little at a time and let it work for a minute or so then scrape off. Once clean glue up any small cracks with super glue, leave to dry and then start sanding.
Depending on the state of the bat depends on grit, but start coarse and work to fine. Random orbital if possible and ensure the sandpsper disc is covering the velcro bit so it doesn't scratch the bat.
Once done oil or wax and job done.
Author
Topic: Refurbed Trott player edition (Read 3216 times)