Custom Bats Cricket Forum
Companies => Custom companies => B3 Cricket => Topic started by: kaartman on December 18, 2015, 05:38:17 PM
-
Assuming I will get 50% off deal I am thinking about my 1st B3 bat shape.
Below is what I am looking for:
1) Long middle (ping everywhere )
2) Front foot is my go to shot. So, I need something that has mid - low sweet spot.
2) Thick toe
3) Full profile
4) Fully dressed 2.9.5 - 2.10
5) Awesome balance
Not worried about edge size/bow/face (rounded or flat). I just need a best possible bat.
I am even thinking of going for shorter blade bat if needed to achieve my specs (provided it won't affect the balance of the bat).
Is there any existing B3 design that is close to what I am looking for or should I go for a bespoke?
Thanks.
-
I would just talk it out with Streaky mate, be miles easier talking straight to the guy who's making it and it doesn't help that he's know's some kind of bat voodoo to make them awesome as well haha
-
Assuming I will get 50% off deal I am thinking about my 1st B3 bat shape.
Below is what I am looking for:
1) Long middle (ping everywhere )
2) Front foot is my go to shot. So, I need something that has mid - low sweet spot.
2) Thick toe
3) Full profile
4) Fully dressed 2.9.5 - 2.10
5) Awesome balance
Not worried about edge size/bow/face (rounded or flat). I just need a best possible bat.
I am even thinking of going for shorter blade bat if needed to achieve my specs (provided it won't affect the balance of the bat).
Is there any existing B3 design that is close to what I am looking for or should I go for a bespoke?
Thanks.
Have a read of my post on the thread relating to the offer - hopefully that will shed a little light. Happy to talk you through once you have an idea.
-
I'd ask nicely for a lower density cleft and go with a 1271. It fulfills all these requirements and is a satisfying shape too. Just needs a lighter cleft as there's so much wood in it.
Sent from my iPhone using Tapatalk
-
Can't disagree with that Tim
-
I'd ask nicely for a lower density cleft and go with a 1271. It fulfills all these requirements and is a satisfying shape too. Just needs a lighter cleft as there's so much wood in it.
Sent from my iPhone using Tapatalk
What is 1271? Where can I find it?
Thanks.
-
What is the weight of a 1271 made with an average cleft?
-
What is the weight of a 1271 made with an average cleft?
Take a look at the doctors post in the original thread think a 400 comes in at 2.15ish (it's on the bat shape poster number 20 I think from memory). I've a GM epic players edition which I presume is a similar shape with thick shoulders and really good coverage (of course doesn't mean you won't mistime the ball).
-
SERIES
A definition of a SERIES bat is the following – a DB1 / DB2 / DB3
([url]http://i65.tinypic.com/20qcgf4.jpg[/url])
CUSTOM
A definition of a CUSTOM bat is bat numbers 4 to 25 in the bat chart OR a bat designed on our website on the custom bat builder.
([url]http://i64.tinypic.com/fns4jl.jpg[/url])
Additional Profile weights
New TKC / DW - 2lb 15
DW- small Edge / BIG spine - 2lb 13.5oz
Typhon - 3lb
([url]http://i64.tinypic.com/29c83sl.jpg[/url])
So many choices!
Not sure if I should go for a DB2, number 11, number 21 or a Warner small edge shape.
Then I need to chose which stickers...
-
Number 20 is 1271 pal
-
Reckon il go for a 3lb Trott with Urban camo stickers - v excited for January now
-
Number 20 is 1271 pal
Perfect, cheers Dave
-
Would anyone be able help me in a similar way? I currently have an oblivion e41 LH. But i would like a longer sweet spot with more wood in the toe.
Any ideas?
Sent from my LG-H815 using Tapatalk
-
Would anyone be able help me in a similar way? I currently have an oblivion e41 LH. But i would like a longer sweet spot with more wood in the toe.
Any ideas?
Sent from my LG-H815 using Tapatalk
Ring streky and bespoke it via skype if you live along way away pal.
You can create what you want we can map then make changes to your shape mate.
-
Was expecting that actually! I will do soon. Cheers
Sent from my LG-H815 using Tapatalk
-
Was expecting that actually! I will do soon. Cheers
Sent from my LG-H815 using Tapatalk
Best way seriously i always say if you have a favourite we can map then make a modification so you get what you really want is my favourite way
-
Is #25 the tendulkar profile?
-
Profile 17 would be my choice ... Waiting to call on monday ... :D
-
I dont mind, any profile would do for 2-6, mid low, super short handle
-
Profile 17 would be my choice ... Waiting to call on monday ... :D
does it have mid - low sweet spot? any idea how big toe is?
thanks.
-
does it have mid - low sweet spot? any idea how big toe is?
thanks.
From the picture it looks like a GM Maxi shape. I am going to call in on Monday and get to know more details .. Will update once I chat with B3.
Sent using Tapatalk
-
In terms of the B3 shapes posted above, I wonder why the bulk of the shapes are above the 2.10, when in my experience the bulk of players play with weights below that point.
-
In terms of the B3 shapes posted above, I wonder why the bulk of the shapes are above the 2.10, when in my experience the bulk of players play with weights below that point.
Hi bats these are pro players bats we make for only majority of our professional players use around 2-9 to 2-13like Tom Kholer Cadmore Graeme Wagg
Some who lets say come via a 3rd party may want lighter and some heavier.
But please remember these are custom shapes you Can bespoke anything under that weight we just thought and find people sometimes want players shapes.
400 is our average density so we out what weight they are at that.
Hope this helps clefts do and can go up to 460 mind and below to around 350
-
In terms of the B3 shapes posted above, I wonder why the bulk of the shapes are above the 2.10, when in my experience the bulk of players play with weights below that point.
Bats_Entertainment ?????
Nice first post.
Probably because "players" get the choice of low density clefts, but when you use a normal density cleft. It comes out heavier.
-
Most our players don't use low density thought we tend to find the 3rd party players do but there a repensatative of custom shapes we make .
More people in this forum ask for lighter clefts than most pro we deal with believe it or not
Hope this helps people don't forget you can customise anything you want the custom bats are a guide and maybe one or two like them I hope so
-
And most ask for a much heavier bat for t20 because they tend not to bat as long in t20.
-
What number on the chart are:
Mullinator
Trott
Zizi
Tonto
Pepsi
Cheers
-
Zizi and tonto not on there mate as there my design but are available neither is mullanator new shape trott is 14 and Pepsi is not on there either mate sorry I can tell you average weights tomorrow though as I'm there all day sorting a few bits and bobs out
Trott is number 20
-
Thanks Procricket. Seems like you are busier than one of Santa's elves.
-
Yes mate been answering what I can for nearly 2 solid days and I hope people bare with me so glad B3 sprung this up on me as they did when my Christmas break was on.
I have had a few negative comments but most positive there simply no catch yes your not going to get super duper low density it all average density stuff on offer plus and minus 10 as we say to people we have a good stock of fresh willow in.
As a volunteer for b3 I do what I can but I'm ultimately a bat nerd like some of you guys with great enthusiasm and a great insight through there work and mine
I got the voucher like everybody else and got me a beautiful 1 stripe db1 if anybody wants to see it in 2-10 plays very well already netted with it
-
I can't believe some people. Negative comments!!!!! I'm just going to order a bat based on shape. My current bats go from 2lb6oz to 2lb14oz so I'm not worried about the weight.
-
People discount the series shape at there peril rememeber who designed them Streaky himself.
If your after light and I mean under 2-9 the db1 is a cracker or number 14 with a few tweaks is a great place to start.
-
I swung a db1 around at Somerset county ground on Saturday and that did indeed feel good.
-
Plenty off series bats at our club. There a good bat.
Not sure how anyone can be negative at 50% of voucher, but then some people are asses for the sake of it.
-
Plenty off series bats at our club. There a good bat.
Not sure how anyone can be negative at 50% of voucher, but then some people are asses for the sake of it.
Me and you are fussy buggers CHRIS
-
@procricket B3 @The Doctor - sorry guys, I know you are inundated with questions, but will it be possible to get a Sulphur in 2.10 or under?
-
@procricket B3 @The Doctor - sorry guys, I know you are inundated with questions, but will it be possible to get a Sulphur in 2.10 or under?
No mate think that cleft was 348
-
Ah that's a shame. Now I'm stuck between Gaz Cross, no16 and no19 - and you know how I like a duckbill @procricket B3!
Anyone had any of those three shapes?
-
Looking at the Series range a DB3 might actually be cool, certainly for the price point...
-
Are you sure Medium-sized Al? There's a bit of concaving there - what about shape no 19?
-
5"8 or so? Thinking more about the £££ at this stage, then again I can easily wait on this till February...
-
Yes mate been answering what I can for nearly 2 solid days and I hope people bare with me so glad B3 sprung this up on me as they did when my Christmas break was on.
I have had a few negative comments but most positive there simply no catch yes your not going to get super duper low density it all average density stuff on offer plus and minus 10 as we say to people we have a good stock of fresh willow in.
As a volunteer for b3 I do what I can but I'm ultimately a bat nerd like some of you guys with great enthusiasm and a great insight through there work and mine
I got the voucher like everybody else and got me a beautiful 1 stripe db1 if anybody wants to see it in 2-10 plays very well already netted with it
I hear you Dave! I get heaps of questions on B3 in Australia on my bat maintenance page and I don't even volunteer, I'm just in the nerd herd like you and really like my B3 kit LOL.
Lucky I totally missed out on the voucher offer completely as that day was hectic, because my wife would have jammed the Xmas tree up you don't want to know!
I haven't even used my August bespoke purchase properly in a game as I have been too happy with my B3 Butterfly former Tonto. New bat pressing is so good.
Keep up the good work mate.
-
People discount the series shape at there peril rememeber who designed them Streaky himself.
If your after light and I mean under 2-9 the db1 is a cracker or number 14 with a few tweaks is a great place to start.
Agree totally Dave, I think the new DB1 shape is perfect for someone who wants to play of the front and back and work the ball to all parts of the ground into gaps without too much risk. Too good for a stand and deliver batsman who is just going long.
I had the DB2 in 2.9 and was unfalr to compare it with the Flare as it is way bigger. New DB1 is my new favourite series shape and with a higher middle is fine for Aussie pitches too.
-
I've used a new DB1 shape in indoors this winter, lovely bat! Middle might be a bit high for me when it comes to outdoors, but it's a great shape and surprisingly big for the weight.
-
We can always move the middle lower if people wanted it could be my bat of choice
-
I have asked Doc views about DW2 shape. DW suited me perfectly so dont wanna meddle much with profile. I am still searching for cad pic though. Dave, will it be possible to get one within 2.12 mate with normal density?
-
Hello mate
we talking about this shape
http://custombats.co.uk/cbforum/index.php?topic=31442.0 (http://custombats.co.uk/cbforum/index.php?topic=31442.0)
If so it should come in around 2-12 pal
Dave
-
(http://i61.tinypic.com/2qtafxy.jpg)
(http://i58.tinypic.com/m79w1t.jpg)
(http://i57.tinypic.com/sllnvl.jpg)
-
Thanks a ton sir.
-
Thanks a ton sir.
its a B3 not a Ton [emoji14]
Sent from my iPhone using Tapatalk
-
Hahaha.. Nice one. :)
-
We can always move the middle lower if people wanted it could be my bat of choice
Just for my understanding, wouldn't this modification amount to customisation and move it to Bespoke range?
-
The old TKC shape that I've just unboxed is very nice, feels lovely in the hands! Dave @procricket B3 thank you very much indeed for putting me onto this!
-
The old TKC shape that I've just unboxed is very nice, feels lovely in the hands! Dave @procricket B3 thank you very much indeed for putting me onto this!
Ive just been having a hit with the old tkc shape and thought that is going to be my "phoenix" purchase. Big enough to please the size fiends amongst our civilisation, whilst still being a standard cleft size. The shape will not disappoint
-
Doc replied today. He suggest either model 1000 (apparently it weights 2.12 but feels like 2.10) or model 1400 (if weight is an issue).
I guess I will go for 1400 or bespoke it for shorter blade.
what are model 1000 and 1400? Any links to help research them? search did not return a thing.
-
I would like to explicitly state that no one has purchased a bat, had calls with streaky or procricket etc. etc. etc. unless there is pictorial proof of the bat shown here...thank you
Now the wait begins, my non-existent bat is a 2 Stripe, pre-made Mullanator, that will be shipped in after Christmas...but it doesn't exist ;) ;) ;)
-
@procricket B3 any luck with a pic of my shape? Don't worry if you are snowed under though.
-
Ive just been having a hit with the old tkc shape and thought that is going to be my "phoenix" purchase. Big enough to please the size fiends amongst our civilisation, whilst still being a standard cleft size. The shape will not disappoint
Just been swinging this around thinking the exact same thing mate, lots of coverage on this bat from a standard cleft. This one weighs just under 2.12 but feels very nice. I know lots of people are wanting to go oversized but I don't think you can go wrong with the tkc old shape. Fits the bill for most players I'd imagine!
Sorry @tushar sehgal I'll get some pics up as well as alongside smileys Mull
-
Yes, yes - you are all very virile with your enormous 2.14 manhood replacements!
However, for us 16 stone weaklings that use light bats, do any owners have any suggestions what works well in the lighter weights? We've heard about the DB1, but who else has a lighter B3, say 2.10 and under - what shapes work for us wand-lovers?
-
Shape 14 pal is a belter
-
(http://i60.tinypic.com/25jwqom.jpg)
14 is a great shape
-
It looks like a big profile for the weight Dave
-
@procricket B3 , @Doctor
Doc suggested that I should go for either Tom Kohler Cadmore shape - 2.12 or model#1400(at 2.10).
What is #1400? Just wondering if it on the above list. If so what is the no?
-
My Tom Kohler Cadmore bat that has pictures earlier in the thread is no 3664
-
Shape 14 pal is a belter
Yep - that's seriously growing on me. However @procricket B3 what do you think of the Gaz Cross or the no16?
-
is shape 21 the Finch shape?
-
I'm not 100% but looks similar to the shape Stokes uses too.
Sent from my SM-G900F using Tapatalk
-
@procricket B3 , @Doctor
Doc suggested that I should go for either Tom Kohler Cadmore shape - 2.12 or model#1400(at 2.10).
What is #1400? Just wondering if it on the above list. If so what is the no?
1400 is the machine code for number 14 off the Custom Pro board - sorry for the confusion.
-
I've been pretty set on shape 14, are there pics anywhere?
-
@procricket B3 , @Doctor
Doc suggested that I should go for either Tom Kohler Cadmore shape - 2.12 or model#1400(at 2.10).
What is #1400? Just wondering if it on the above list. If so what is the no?
yes - 1400 is 14 in the above picture, sent you an email about it too!
-
yes - 1400 is 14 in the above picture, sent you an email about it too!
Thanks.
-
18 shape looks enticing. Dave, any idea how concaved is it?
-
Not overly if it what i think it is will check when B3 open
-
Thanks mate. And always keep an eye for premades for mull or tkc and let me know whenever you can please. I am also thinking to discuss rahane shape with the Doc once he comea back. Confusion.. Confusion..
☺
-
What's the weight of a 400 density Tonto shape?
-
2lb 10.5oz...iv asked that question myself as very interested
Sent from my iPhone using Tapatalk
-
2lb 10.5oz...iv asked that question myself as very interested
Sent from my iPhone using Tapatalk
Is that in relation to the question about the Tonto weight?
-
Thanks mate. And always keep an eye for premades for mull or tkc and let me know whenever you can please. I am also thinking to discuss rahane shape with the Doc once he comea back. Confusion.. Confusion..
☺
Let us know the outcome of Rahane shape discussion :D
-
Pretty sure Tonto is 2lb12+ for a 400 density cleft as I was looking at one in last years' butterfly deal and didn't go for it as was heavier than I wanted.
-
Let us know the outcome of Rahane shape discussion :D
Sure mate, i will although i have my apprehensions about keeping the weight in check as Indian bats are gigantic. Keeping my fibgers crossed to get one in 2.12. Even if we dont, i think it is a lovely shape to be copied. I will update :)
-
How do #14 and DB1 compare in terms of pickup for the same weight?
-
I don't know how to link another thread in here but there is one in the B3 section from Dave about the Tonto design. The opening post states that the Tonto is available at 2.10 1/2 from a 400 density cleft.
-
I don't know how to link another thread in here but there is one in the B3 section from Dave about the Tonto design. The opening post states that the Tonto is available at 2.10 1/2 from a 400 density cleft.
I have seen a couple of 400 weights banded around, hence my enquiry. @procricket B3, can you help me out?
-
Yeah as I recall there were a couple of different weight spoated for it in that thread, and when I was ordering Streaky confirmed it was 2lb12. I got a slightly supersized new shape DB1 instead, which is based off the Tonto apparently, could be worth a look for you.
Here's mine: http://custombats.co.uk/cbforum/index.php?topic=35217.msg552843#msg552843 (http://custombats.co.uk/cbforum/index.php?topic=35217.msg552843#msg552843)
-
I'm sure a 400 cleft will produce a 2.12 Tonto.
I have a 2.7 Tonto which was made from a sub 350 cleft, definitely a good choice shape wise.
-
Gas Cross shape for myself as and when I think.
-
(http://images.tapatalk-cdn.com/15/12/27/39169a09972c8fc9ed7089720a86c137.jpg)
Sent from my iPhone using Tapatalk
-
That solves it!
Sent from my iPhone using Tapatalk
-
1lb 10.5
That's riduculously light! :D
-
True wand :)
Sent from my iPhone using Tapatalk
-
Lovely stuff, I was hoping for anything around 2'10. Looking forward to ordering mine in the new year.
-
1lb 10 that will do me nicely
-
Email sent asking for some advice, but I think it's between the DB3, #14 or #19
-
As someone who is 5'6 and struggles with bats above 2lb8, realistically what are the choices with the custom bats that will weigh/pick up similar to that sort of weight? Assuming gaz cross, #14 and #19 are my only real choices.
-
@dcullen8 as you're (and this isn't meant to sound as It probzbly does) a shorter player, would a small mens bat be a better option.
@uknsaunders has a full width shorter blade (and maybe shorter handle, I just know It felt small to me) that was a lovely full shape in a low weight.
It could be worth getting something similar mate.
-
As someone who is 5'6 and struggles with bats above 2lb8, realistically what are the choices with the custom bats that will weigh/pick up similar to that sort of weight? Assuming gaz cross, #14 and #19 are my only real choices.
Im 5'7 - worth thinking about a harrow length/ full width bat with either a sh or SSH. It's should save an oz or so in weight/feel a little less long in the hands. I modified Dave's Typhoon profile to create a 2'11 with 45mm edges/60mm spine/high middle/offset edges with this kind of setup.
Sent from my Lenovo B6000-F using Tapatalk
-
Great ideas straight away, thankyou! Was holding off til after the new year to send the guys an email, definitely gives me a starting point!
-
i am also 5'6, prefer Super Short Handle and weight below 2-7
-
I think if you want to get below 2lb7 the adult light bats are the way to go, 2lb4-2lb6 on the website, or gonwith the above suggestions. Someone with a better grasp will be along to advise though id suspect.
-
i am also 5'6, prefer Super Short Handle and weight below 2-7
Id suggest one of the DB series shapes (DB1) - if you take a look at the thread they come at a range of weights as a stock shape and are very well balanced
-
A standard DB1 comes out at 2lb8, shouldn't take much fiddling to get one of those you'd like?
-
I would suggest the DB1 too which is a great shape wouldn't take much at all to tweak to 2-7.
The adult light is available in the weight you want mate.
-
What is the standard weight for Mullanator?
-
2-13 and a half mate Streaky is saying
-
Hi Dave. How do #14 and DB1 compare in terms of pickup for the same weight?
-
Db1 for me picks up better with a slightly higher middle
-
Got an email from Streaky who's suggested #19 out of the ones I've considered, anyone got any experience with it? Thoughts?
-
Got an email from Streaky who's suggested #19 out of the ones I've considered, anyone got any experience with it? Thoughts?
Looks a belter and will probably be my weapon of choice too, waiting on a response from the guys.
-
Looks a belter and will probably be my weapon of choice too, waiting on a response from the guys.
Hi @dcullen8 - what email have you used as nearly at the bottom of the pile (46 to go) and cannot see your email.
Streaky
-
Hi @dcullen8 - what email have you used as nearly at the bottom of the pile (46 to go) and cannot see your email.
Streaky
Just the generic enquiries@b3cricket.com email found on the website, i can forward the email to a different address if thats easier?
-
I would suggest the DB1 too which is a great shape wouldn't take much at all to tweak to 2-7.
The adult light is available in the weight you want mate.
How does the adult light differ from a standard SH?
-
Slightly shorter bat, but not as short as a Harrow..
Check there site bud u can see on there..
-
I'm going to b3 I'm going to take a few pictures of the shapes we have I stock for people of that helps
-
Hi Dave sent an email awhile ago and not heard anything regarding the offer,email was sent to david@b3cricket.
Cheers
Ian
-
I'm going to b3 I'm going to take a few pictures of the shapes we have I stock for people of that helps
If there are any Tonto bats around, some photos would be great Dave.
-
I'm going to b3 I'm going to take a few pictures of the shapes we have I stock for people of that helps
Profile pictures with weights would be ideal for those of us that can't make it down..
Thnks.
-
If there are any Tonto bats around, some photos would be great Dave.
I have two tonto here with me
-
I'm going to b3 I'm going to take a few pictures of the shapes we have I stock for people of that helps
That'd be really helpful Dave.
-
Found this topic with some specs and pics of the Tonto. Thought it might help. Looks like a cracking shape.
http://custombats.co.uk/cbforum/index.php?topic=33577.0 (http://custombats.co.uk/cbforum/index.php?topic=33577.0)
-
There my actual bats I played with my design a touch as the clefts where too light will get a picture tomorrow but that is the shape and one I used for half of last season and today on the machine
-
I'm going to b3 I'm going to take a few pictures of the shapes we have I stock for people of that helps
Oh Dave - if you get a chance to take a decent profile pice of a Gaz Cross no4 shape, that would be brilliant thanks!
-
Oh Dave - if you get a chance to take a decent profile pice of a Gaz Cross no4 shape, that would be brilliant thanks!
Gaz cross is a decent profile mate we was having a hit with one of his bats today mate pick up is very good indeed
-
Yep - it's deffo growing on me, I think it's the one I am going for!
-
Yep - it's deffo growing on me, I think it's the one I am going for!
That is the one that takes my fancy. however would like to see an actual copy of one.
-
Hey Fattus, did someone steal your cats melon helmet? Or, was that a pic of you on Sunday morning?
-
Surely this thread is proof that you can have too much of a good thing?
-
Hey Fattus, did someone steal your cats melon helmet? Or, was that a pic of you on Sunday morning?
I tried to change it, and now I can't get it back again!!!!
-
Any thoughts on the Tom Kohler- Cadmore profile( no10)?
-
Any thoughts on the Tom Kohler- Cadmore profile( no10)?
there's a thread about one of those bought recently somewhere
Sent from my iPhone using Tapatalk
-
I bought a 3 stripe in the offer that was made for TKC before he changed shape, pics in this thread http://custombats.co.uk/cbforum/index.php?topic=36809.0 (http://custombats.co.uk/cbforum/index.php?topic=36809.0)
I love the shape, plenty of wood throughout and it picks up very well
-
Ooh, I do like that!
Think that's my mind made up then
-
Sorry if this has already been covered but wanting to know the weights of the new TKC & new Mullaney shapes with average density clefts? The new, tweaked shapes that each player talks about and models in YouTube videos. Thanks.
@procricket B3 maybe you can help?
-
Im 5'7 - worth thinking about a harrow length/ full width bat with either a sh or SSH. It's should save an oz or so in weight/feel a little less long in the hands.
Gone with this exact set up, left the bespoking in the hands of someone a little more knowledgeable than myself. Hoping for something special at the end of the month!